20/ 100
F
OverallF0/100
Outdoor Products Go Dry Bag

Outdoor Products · Waterproof Outdoor Gear Bags

Outdoor Products Go Dry Bag

F · High PFAS

Skip until brand discloses waterproof coating composition.

Verdict: SkipWaterproof coating composition undisclosed; formaldehyde-resin risk in fabric finishing typical of this category. Brand silence on PFAS warrants caution; safe if used dry-storage only.

Outdoor Products does not disclose PFAS status or coating chemistry for this dry bag. Waterproof treatments commonly use PFAS; lack of transparency warrants caution.

Still want this one anyway? Check the price on Amazon. We’d swap it.

Material

Fabric with unspecified waterproof/water-resistant coating

Brand disclosure

Brand is silent on PFAS

Lab data

No public lab test

Why this grade

Waterproof / stain-resistant treatment

water-repellent coating treatments have historically used PFAS.

Hurts the grade

Category baseline

clothing is a category where PFAS exposure is more common.

Hurts the grade

No PFAS disclosure

No public statement about PFAS in this product.

Hurts the grade

The full breakdown

What it's made of and why it matters

Outdoor Products Go Dry Bag uses an unspecified waterproof or water-resistant fabric coating, which is the critical unknown. Most waterproof coatings in consumer dry bags are either polyurethane, acrylic-based, or PFC/PFAS compounds. The fabric substrate itself likely contains formaldehyde-release resins used in fabric finishing to improve wrinkle resistance and dimensional stability. Without disclosure, you cannot rule out legacy PFC treatments or novel alternatives that may off-gas or leach in warm or wet conditions.

The brand's record and disclosure

Outdoor Products has not publicly disclosed the chemical composition of its waterproof coatings or committed to PFAS-free alternatives on record. The brand maintains minimal transparency on fabric treatment chemistry or third-party certifications (such as Bluesign, OEKO-TEX, or GOTS). This silence is notable given industry-wide movement toward PFC disclosure following EPA and international restrictions on PFOA and PFOS. No major recalls or safety controversies specific to this product line are documented.

How it compares in its category

Outdoor dry bags typically fall into a mid-market tier where PFAS-free and certified alternatives are increasingly available (Patagonia, REI Co-op, some Osprey models explicitly label non-fluorinated coatings). Outdoor Products does not market this bag as PFAS-free or certified-safe, positioning it as a budget option. For comparable price, you can find competitors with disclosed coatings or third-party certification; the lack of transparency here is the differentiator, not the price.

If you buy it

Use the bag exclusively for dry storage; do not allow it to come into prolonged contact with food, skin, or hot liquids. Air dry after wet exposure rather than machine washing, which can accelerate coating degradation and potential leachate release. Replace the bag if the coating shows visible cracking, peeling, or delamination, as this signals failure and exposure to fabric chemicals. Store in a cool, dry location away from direct sunlight to slow off-gassing of any residual formaldehyde or solvent vapors in the fabric.

Beyond PFAS: other things we checked

Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”

Possible

PFAS in waterproof coating

Coating composition is undisclosed; legacy PFC-based waterproof treatments were standard in this product category until ~2015. Outdoor Products has not stated whether the coating is PFC-free, making PFAS presence unconfirmed but plausible, especially in a budget-tier product.

Possible

Formaldehyde-release resins in fabric finishing

Fabric finishing for water resistance and wrinkle-set commonly involves formaldehyde-releasing urea-formaldehyde or melamine-formaldehyde resins. These are not listed in product specs but are standard textile industry practice; off-gassing risk is higher in warm, humid storage or use.

Reported

Coating degradation and leachate release

Unspecified waterproof coatings degrade over time, especially with UV, heat, or friction. Peeling or delaminating coatings can release coating monomers and solvents; this has been noted in consumer reports for budget-tier waterproof gear but no formal recall exists for this specific product.

None known

Heavy metals in synthetic dyes

No specific heavy metal contamination is documented for Outdoor Products dry bags. However, if the bag is brightly colored, metal-complex or azo dyes used in polyester and nylon fabrics can contain trace heavy metals (lead, cadmium); unbranded or untested batches carry slightly higher risk.

Possible

Volatile organic compounds (VOCs) off-gassing

Polyurethane and acrylic waterproof coatings off-gas VOCs during manufacture and storage; this is transient but can be detected as a chemical smell, especially in sealed bags. Outdoor Products does not specify curing time or VOC content; off-gassing diminishes over weeks to months of airing.

What we don’t know

This grade is a model-based estimate from public materials, coatings, and brand disclosure at 35% confidence. It is not a lab result.

No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.

The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.

Formulations and coatings change between production runs. Always check the current label before buying.

Safer alternatives in Waterproof Outdoor Gear Bags

Marmot Tool Box

Marmot

Tool Box

Nylon, polyester, cotton blend; details unspecified

D
F
PFASAll
D · Elevated5 flags

Toolbox, not garment. Check product specs for water-repellent coating.

Risky category by default

More waterproof outdoor gear bags grades

How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.