Spigen · Waterproof Phone Chargers & Cable Cases
Spigen EB6010CC Essential USB-C Cable 60W 100cm Black
Lower concern. Standard USB cable with no known PFAS-prone components.
USB-C cables typically use PVC or TPE jackets without intentional PFAS coatings. Spigen makes no PFAS claims but uses conventional materials with minimal fluorochemical risk.
Shop Spigen on Amazon →Material
PVC jacket, copper conductors, standard connector housing
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
Category baseline
other is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
The full breakdown
What it's made of and why it matters
This cable uses a PVC (polyvinyl chloride) outer jacket over copper conductors with standard USB-C connector housings, typical for budget-tier charging cables. PVC is a stable, non-leaching thermoplastic when not heated excessively or degraded; it does not off-gas volatile organics under normal room-temperature use. The 60W rating indicates appropriate gauge copper for that power level, so you avoid undersized conductors that generate excess heat.
The brand's record and disclosure
Spigen is a large third-party accessory manufacturer with no publicized safety certifications, recalls, or disclosed chemical standards for this cable. The brand maintains silent stance on PFAS and does not publish material sourcing or testing reports. No major safety incidents or regulatory action against Spigen's cables are on public record, though the company also does not differentiate itself on material transparency.
How it compares in its category
USB-C cables vary widely in quality and durability; Spigen's mid-market positioning means this is a stripped-down design without premium shielding or reinforced connectors, but also without exotic coatings that increase hazard exposure. Most budget cables use PVC jackets; more expensive alternatives may use TPE (thermoplastic elastomer), which is more durable but not inherently safer chemically. This cable is functionally equivalent to many other third-party 60W chargers in hazard profile.
If you buy it
Inspect the jacket regularly for cracks, cuts, or degradation; if PVC cracks expose copper, discontinue use immediately to avoid short-circuit or shock risk. Do not coil tightly or bend sharply at the connector; PVC becomes brittle with repeated flex and temperature cycling. Keep away from direct heat sources or prolonged sunlight, which accelerates PVC degradation. Replace if the jacket shows visible wear, discoloration, or stiffness after 1-2 years of regular use.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
PVC jacket degradation and copper exposure
PVC jackets can crack or split over time, especially with repeated flexing, temperature swings, or poor storage. Exposed copper creates shock and short-circuit hazards; no inherent toxicity from the PVC itself under normal use, but mechanical failure is the primary risk.
Phthalate plasticizers in PVC
PVC formulations sometimes include phthalate plasticizers to improve flexibility; Spigen does not disclose the specific PVC compound used. In a cable jacket at room temperature, leaching into food or skin contact is negligible, but material transparency is absent.
Connector housing and solder residues
Standard USB-C connectors are typically lead-free soldered to printed circuit boards inside the housing. No recalls or testing failures for Spigen connectors are on record, and modern RoHS compliance is industry standard, but the brand does not publish QA data.
Thermal stress during high-power charging
A 60W cable carries approximately 3 amps at 20V; under normal conditions, the cable and connectors remain cool. Overcharging, high-impedance connections, or use with non-compliant chargers could generate localized heat that accelerates PVC aging, though this is a reliability issue rather than an acute chemical hazard.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
Safer alternatives in Waterproof Phone Chargers & Cable Cases
Nomad
Universal Cable
Braided nylon and metal connectors
Lower concern. Nylon cable has minimal PFAS risk.
✓Naturally PFAS-free material
More waterproof phone chargers & cable cases grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.