Spigen · Waterproof Phone Chargers & Cable Cases
Pkpower Usb-c Charging Cable Cord Wire for Power Banks for iWalk, Spigen PocketBoost, Iniu, RAVPower, Bonai, Anker Usb-c
Lower concern. Standard USB-C cable with no PFAS-prone coatings.
USB charging cables typically use PVC or TPE sheaths without PFAS. No special coatings, water resistance, or nonstick features present. Brand discloses nothing about PFAS, which is normal for this product type.
Shop Spigen on Amazon →Material
PVC or TPE cable sheath, copper/aluminum connectors
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
Category baseline
other is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
The full breakdown
What it's made of and why it matters
This cable uses a PVC or TPE (thermoplastic elastomer) outer sheath over copper or aluminum conductors, typical for mid-range charging cables. PVC is rigid and durable but less flexible than TPE; TPE is softer and more resistant to cracking at bend points. Neither material leaches toxic substances during normal room-temperature use, though PVC can emit hydrogen chloride if burned at high temperatures (not a consumer concern unless cable is exposed to fire). The metal connectors are standard USB-C contacts, prone to oxidation over years of use but not a chemical safety issue.
The brand's record and disclosure
Spigen is a South Korean consumer electronics accessories brand with no public record of material safety certifications, third-party testing disclosures, or chemical hazard statements for its cables. The company has not issued transparency reports on chemical restrictions or PFAS avoidance. No recalls or safety complaints specific to this cable model appear in public databases. Spigen's silence on material sourcing is typical for the cable accessory market, where disclosure is minimal across the industry.
How it compares in its category
USB-C cables are a low-hazard product category because they carry no substances into food, skin contact is minimal, and they do not release volatile chemicals under normal use. This cable is indistinguishable in safety profile from competitors like Anker, Bonai, or RAVPower branded alternatives, all of which use similar PVC/TPE and copper construction. The main durability difference is sheath thickness and connector gold plating, which affect lifespan but not chemical safety. Certified cables (those tested to USB-IF standards) may have slightly better connector reliability, but Spigen does not advertise such certification.
If you buy it
Store the cable at room temperature away from direct sunlight, as PVC and TPE can degrade and become brittle under UV exposure over years. Do not route the cable through high-heat areas (above 60°C) such as near radiators or in car dashboards during summer, as this can accelerate sheath degradation and increase microscopic particle shedding risk. Inspect the cable quarterly for visible cracks, exposed wires, or discoloration; replace immediately if connectors corrode visibly (white or green oxidation). Normal daily use poses no inhalation or ingestion risk; the cable does not off-gas under typical conditions.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
PVC degradation and particle shedding
PVC outer sheath can crack or become brittle over 2-3 years of use or if exposed to heat/UV; microscopic particles may be released but ingestion risk is low. No established health endpoint for PVC particle inhalation from cables in indoor environments.
Metal connector oxidation
Copper and aluminum contacts will oxidize over time, reducing electrical efficiency and causing intermittent charging. Oxidation products (copper oxide, aluminum oxide) are not acutely toxic but indicate cable degradation; replacement is recommended for function, not safety.
Nickel or other heavy metal traces in solder
Cable connectors may contain solder with trace nickel or lead, but these are sealed within the connector housing and pose no exposure risk during normal handling or use. No test data on this specific cable model is publicly available.
Bacterial or mold growth under moisture
If stored in damp conditions or submerged accidentally, TPE/PVC can trap moisture in micro-cracks, potentially supporting microbial growth. This is a practical storage issue rather than a manufacturing hazard; dry storage prevents it.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
Safer alternatives in Waterproof Phone Chargers & Cable Cases
Nomad
Universal Cable
Braided nylon and metal connectors
Lower concern. Nylon cable has minimal PFAS risk.
✓Naturally PFAS-free material
More waterproof phone chargers & cable cases grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.