Spigen · Waterproof Phone Chargers & Cable Cases
Spigen DuraSync 60W USB-C Cable | Charging & Data Sync Cable | Fast Charge
Standard USB cable with no PFAS risk indicators identified.
USB-C cables typically use nylon, copper, and elastomer materials without intentional PFAS addition. Spigen provides no PFAS disclosure but standard electronics cabling poses lower PFAS concern than coated or treated products.
Shop Spigen on Amazon →Material
Braided nylon outer jacket, copper wire core, thermoplastic elastomer connectors
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
Category baseline
other is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
The full breakdown
What it's made of and why it matters
The DuraSync uses a braided nylon outer jacket over copper wire conductors with thermoplastic elastomer (TPE) connectors. Nylon braiding is inert and non-leaching; copper is a standard, safe conductor. TPE connectors are chemically stable at room temperature and normal charging currents (under 60W, no extreme heat generation in the cable itself). This material stack poses no known leaching or off-gassing risks in normal consumer use.
The brand's record and disclosure
Spigen is a consumer electronics accessories manufacturer with no major product recalls or safety disclosures on record for cables. The brand does not publicly disclose PFAS policy or provide third-party testing certification for materials. However, the absence of disclosed issues does not indicate problems; USB cables from mid-tier brands like Spigen typically use commodity materials without additive concerns.
How it compares in its category
Braided nylon cables are standard in the current market and represent no material advantage or disadvantage versus unbraided PVC or TPE jackets from competitors. The 60W rating is modest for USB-C (top-tier cables support 240W), so thermal stress on the cable is low. Build quality and durability appear middle-of-road for the price tier, comparable to other Spigen or Amazon Basics offerings.
If you buy it
Inspect connectors for cracks or bent pins before first use. Avoid coiling tightly or kinking the cable, as this can damage internal copper strands over time. Replace if the outer braid tears and exposes inner layers, as this increases wear on conductors. Store in a cool, dry place; the TPE connectors remain stable below 60°C, well below typical household environments. No special maintenance is needed; standard cable care applies.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Connector wear and intermittent contact
TPE connectors can accumulate micro-wear from repeated insertion cycles. This is typical for all USB cables and not specific to Spigen, but repeated contact and release may eventually cause loose connections rather than acute failure.
Conductor degradation from flexing
Copper wire inside braided cables can fatigue and break if the cable is bent sharply or coiled tightly repeatedly. This is a mechanical durability issue, not a chemical hazard, but may lead to shorts or loss of function after 1-3 years of heavy use.
Nylon degradation from UV exposure
Nylon braiding is resistant to indoor light but can yellow and weaken if stored in direct sunlight for months. No reports exist for this cable line; this is general material knowledge.
Thermal stress at high current
At 60W (20V/3A or similar), this cable carries moderate current with minimal heating. No fire or insulation failure reports exist for Spigen cables in this power range under normal conditions.
Phthalates in TPE connectors
TPE formulations vary; food-contact TPE is typically phthalate-free, but electronics-grade TPE may use older plasticizer packages. No specific testing or disclosure from Spigen; risk is not established for this product or brand.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
Safer alternatives in Waterproof Phone Chargers & Cable Cases
Nomad
Universal Cable
Braided nylon and metal connectors
Lower concern. Nylon cable has minimal PFAS risk.
✓Naturally PFAS-free material
More waterproof phone chargers & cable cases grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.