Puma · Athletic Insoles & Orthotics
Puma Evercushion Pro insole width mid
Lower concern. Foam insoles lack typical PFAS triggers.
Puma Evercushion Pro is a foam insole without waterproof or stain-resistant coatings that commonly contain PFAS. Puma discloses no PFAS information; no third-party testing available.
Still want this one anyway? Check the price on Amazon. We’d swap it.
Material
foam cushioning, textile upper
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
Category baseline
clothing is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
The full breakdown
What it's made of and why it matters
Puma Evercushion Pro insoles use proprietary foam cushioning (likely polyurethane or EVA-based) bonded to textile uppers. Foam cushioning in footwear typically avoids the coatings, glazes, and heavy-metal pigments that trigger major hazards in cookware or ceramics. The textile layer is the primary exposure point; synthetic shoe textiles are generally low-risk unless treated with problematic dyes or finishes.
The brand's record and disclosure
Puma does not publicly disclose detailed material safety data for individual insole lines, and the brand has not made prominent commitments to PFAS phase-out in apparel as of recent records. No major safety recalls specific to Evercushion Pro insoles are documented. Puma's transparency on chemical use in footwear lags leaders like Adidas, but established hazard incidents tied to insoles themselves are not on record.
How it compares in its category
Foam insoles are inherently lower-risk than leather-lined or heavily treated shoe components because they avoid tanning chemicals, synthetic dyes, and adhesive-heavy construction. Evercushion Pro sits mid-market for insole technology and safety profile; premium brands (Nike, On) offer slightly more transparency, but budget alternatives carry similar chemical uncertainty. Replacement insoles in general pose minimal cumulative exposure compared to full footwear.
If you buy it
Replace insoles every 6-12 months or when cushioning flattens, as degraded foam may shed microparticles. Store in a dry place to prevent mold growth in the textile layer. Avoid prolonged exposure to heat (dishwasher, direct sunlight) as polyurethane foam can break down. Hand wash textile covers if needed with mild soap and air dry.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Formaldehyde resins in textile finishes
Textile uppers may contain formaldehyde-releasing resins for wrinkle resistance or anti-microbial treatment. Puma does not specify finish chemistry for this line; off-gassing risk is low in insoles due to limited surface area and indirect skin contact.
Azo dyes in synthetic textiles
Textile upper may be dyed with azo colorants, which can break down under sweat and skin contact to release aromatic amines. Risk is minor because insoles have indirect contact with skin and typical wear conditions do not strongly promote dye degradation.
Polyurethane foam degradation and particulate shedding
Polyurethane foam degrades over time with flex and moisture exposure, potentially shedding microparticles into the shoe. This is a wear-related hazard common to all foam insoles; replacement frequency mitigates risk.
Adhesive volatiles (VOCs) in bonding layers
Foam-to-textile bonding typically uses polyurethane or rubber adhesives that can off-gas during the first weeks of use. Puma does not disclose adhesive formulations; initial off-gassing is generally mild and resolves quickly with airing.
Antimony in polyester textiles
Antimony is a byproduct catalyst in polyester synthesis and can leach in trace amounts. Insole textiles are not documented to pose antimony exposure risk, and no recalls or warnings exist for this product line.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
More athletic insoles & orthotics grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.