Mophie · Waterproof Phone Chargers & Cable Cases
Mophie USB-C PD 30W GaN Charger
Lower concern. Electronic chargers rarely use PFAS in primary components.
USB-C charger uses standard plastic and metal housing typical of consumer electronics. No known PFAS-prone materials or surface treatments identified; brand makes no PFAS claims.
Shop Mophie on Amazon →Material
Plastic housing, metal contacts, silicon components
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
Category baseline
other is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
The full breakdown
What it's made of and why it matters
Mophie's 30W GaN charger uses a plastic housing (likely polycarbonate or ABS), metal contacts (typically gold-plated copper), and gallium nitride semiconductor components. GaN chips are inert at normal operating temperatures and do not leach or off-gas. The plastic housing is not in direct food contact and does not typically require hazardous flame retardants because chargers operate at low ambient heat relative to cookware or heated textiles.
The brand's record and disclosure
Mophie (owned by Nexpow/Incipio) does not publish detailed material safety data sheets for consumer chargers, which is typical for the accessory market but limits transparency. No product recalls or contamination incidents are on record for this specific model. The brand has not made public commitments regarding PFAS phase-out or chemical disclosure, though silence on this issue is common among charging accessory makers.
How it compares in its category
USB-C PD 30W chargers from Anker, Belkin, and Apple share similar construction (plastic housing, GaN or silicon components). This Mophie unit is competitively positioned and carries no known safety differentiator, either worse or better, compared to mainstream alternatives. GaN technology itself is considered a safer evolution from older silicon designs because it generates less waste heat.
If you buy it
Keep the charger in a cool, dry location and avoid wrapping the cable tightly around the unit, which can trap heat. Do not block ventilation holes on the housing. Replace the charger if the plastic casing cracks, the cable frays, or the contacts corrode. Unplug after charging is complete; there is no safety benefit to leaving it plugged in idle.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Plastic housing degradation and leaching
USB charger housings are not designed for food contact or skin immersion. No documented leaching of BPA, phthalates, or other plasticizers from Mophie charger casings under normal use conditions.
Metal contact corrosion and electrical safety
Gold-plated contacts can corrode over time if exposed to moisture or oxidative environments, potentially increasing contact resistance and heat generation. Risk is mitigated by storing chargers in dry conditions and inspecting contacts periodically.
GaN semiconductor toxicity
Gallium nitride is a stable inorganic compound used safely in power electronics for decades. No acute or chronic toxicity is documented from GaN chargers under normal handling.
Flame retardant additives in plastic
USB chargers generate minimal sustained heat and typically do not require halogenated or phosphorus flame retardants in their housings. Standard commercial plastics used in this category rarely include problematic flame retardants.
Thermal runaway or overheating
Generic risk in fast-charging accessories if internal components fail. Mophie has no specific recalls on record for this 30W model, but always use certified USB-C cables and avoid damaged chargers to reduce overheating risk.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
Safer alternatives in Waterproof Phone Chargers & Cable Cases
Nomad
Universal Cable
Braided nylon and metal connectors
Lower concern. Nylon cable has minimal PFAS risk.
✓Naturally PFAS-free material
More waterproof phone chargers & cable cases grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.