JBL · Waterproof Phone Chargers & Cable Cases
Replacement Micro USB Charger Cord for JBL Clip 3 2, JBL Flip 4
Lower PFAS concern. Standard USB cable with no known high-risk coatings.
Replacement micro USB charger cable uses standard copper and PVC/TPE materials common in electronics. No water resistance or stain-resistant treatment typical of PFAS-high products.
Shop JBL on Amazon →Material
Copper wire, PVC/TPE cable jacket
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
Category baseline
other is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
The full breakdown
What it's made of and why it matters
This cable uses copper wire for conductivity inside a PVC or TPE (thermoplastic elastomer) outer jacket. PVC is rigid and cheaper; TPE is softer and more flexible but both are chemically stable when undamaged. The connector is standard USB micro format with no special coatings. No flammable or toxic materials are inherent to this construction when functioning normally.
The brand's record and disclosure
JBL (Harman International, owned by Samsung) does not publicly disclose detailed material composition or third-party certifications for basic accessories like replacement cables. No recalls or documented safety failures have been issued for JBL micro USB charger cords. The brand does not advertise low-hazard or certified-safe status for these products, reflecting typical industry transparency levels for commodity cables.
How it compares in its category
Replacement micro USB cables are among the lowest-risk electronics accessories. Most competitors (Amazon Basics, Anker, Monoprice) use identical PVC or TPE jackets with copper wire. Differentiation is minimal; this cable is mid-market priced and functionally equivalent to generic alternatives. No material advantage or disadvantage versus other major brands in durability or safety profile.
If you buy it
Store the cable loosely coiled, not kinked, to prevent wire fracture and overheating during use. Avoid exposure to sharp objects, extreme heat (above 60C ambient), or moisture that could corrode copper or degrade the jacket. Replace immediately if the jacket shows cracks, fraying, or exposed wire; this creates electrical shock and fire risk. Inspect monthly if used daily, especially near the connector where flexing causes wear.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Electrical shock from damaged insulation
If the PVC or TPE jacket cracks or tears from physical wear or rough handling, exposed copper wire becomes a shock hazard. This is not a manufacturing defect but a foreseeable outcome of cable aging and improper storage.
Heat buildup in damaged or defective cable
A short circuit in the wire or connector, or use with a non-compliant power adapter, can cause the cable to overheat and potentially ignite nearby flammable materials. No recall history for JBL cables indicates this is rare but remains a general risk for all USB cables.
Phthalate leaching from PVC jacket
If the cable uses traditional PVC rather than phthalate-free PVC, trace phthalates could migrate during storage or heat exposure. JBL does not disclose whether phthalate plasticizers are used in this specific product; available data does not confirm phthalate presence or absence.
Lead or cadmium in solder at connections
Micro USB connectors may use lead-based solder depending on manufacturing origin and supplier. JBL does not publish material declarations for soldered joints. No recall or test data for this product suggests lead solder presence, but no public certification excludes it either.
Bacterial or mold growth in stored cable
If stored in a damp environment, the cable surface (especially near connectors) can support microbial growth if not dried after moisture exposure. This is an environmental storage issue, not a manufacturing defect, and is preventable through proper care.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
Safer alternatives in Waterproof Phone Chargers & Cable Cases
Nomad
Universal Cable
Braided nylon and metal connectors
Lower concern. Nylon cable has minimal PFAS risk.
✓Naturally PFAS-free material
More waterproof phone chargers & cable cases grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.