JBL · Waterproof Phone Chargers & Cable Cases
JBL Power Cord for Xtreme 2 Waterproof
Lower concern. Standard power cord unlikely PFAS source.
Power cords typically use PVC or rubber insulation without intentional PFAS. JBL has not disclosed any PFAS treatment. No lab data available for this specific accessory.
Shop JBL on Amazon →Material
Rubber/PVC power cord, standard electrical insulation
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
Category baseline
other is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
The full breakdown
What it's made of and why it matters
JBL's Xtreme 2 power cord uses rubber or PVC as its outer insulation layer, typical for consumer electronics charging cables. These materials are chosen for flexibility, water resistance (relevant given the speaker's waterproof design), and electrical safety. PVC and rubber insulation have undergone decades of safety standardization; the cord likely meets UL or IEC certification for voltage and thermal stress.
The brand's record and disclosure
JBL (Harman International, owned by Samsung) does not publicly disclose cord-specific material certifications or PFAS avoidance statements for replacement accessories. The company has no documented recalls or safety controversies tied to power cords. Replacement accessories generally receive less regulatory scrutiny than primary products, and JBL provides minimal transparency on insulation composition beyond standard compliance.
How it compares in its category
Power cords are among the lowest-risk consumer electronics accessories; OEM replacements like this JBL cord are functionally interchangeable with third-party equivalents if they meet amperage and connector specs. Most hazards (electrical shock, fire) are addressed by regulatory standards rather than brand differentiation. This cord sits in the safety mainstream for the category with no distinguishing vulnerabilities.
If you buy it
Inspect the cord regularly for cuts, fraying, or heat damage to the insulation; replace immediately if exposed wires are visible. Do not coil tightly around the speaker during storage, as repeated bending accelerates insulation cracking. Keep the connector dry before use with the Xtreme 2. Replace the cord if it becomes hot to the touch during normal charging (normal is warm, not hot).
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Electrical shock risk from insulation degradation
Rubber and PVC degrade over years of flexing, UV exposure, or heat stress. If the outer insulation cracks, the internal conductors become exposed, creating shock hazard. No field failures are documented for JBL Xtreme 2 cords specifically, but this is a generic aging failure mode for all power cords.
Phthalates in PVC insulation
If the cord uses plasticized PVC (common for flexibility), phthalate softening agents are typically present. These are not absorbed through skin contact with intact insulation and do not pose direct hazard during normal use. Concern applies only if cord is chewed, ingested, or heavily abraded and dust is inhaled (low-probability scenario).
Thermal runaway if cord is pinched or compressed
Compression or tight coiling can trap heat and damage insulation from the inside. No specific design flaw is known for this model, but using proper cable management reduces this universal risk.
Counterfeit or substandard replacement risk
Replacement power cords from unauthorized sellers sometimes have thinner insulation, lower amperage ratings, or missing safety certifications. Buying directly from JBL or certified retailers mitigates this risk; third-party cords may carry unlisted fire or shock hazards.
Heavy metals in insulation colorants
Power cord insulation rarely uses pigments; color is typically from the base material (natural rubber or PVC resin). No evidence exists of lead or cadmium in standard JBL power cord insulation.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
Safer alternatives in Waterproof Phone Chargers & Cable Cases
Nomad
Universal Cable
Braided nylon and metal connectors
Lower concern. Nylon cable has minimal PFAS risk.
✓Naturally PFAS-free material
More waterproof phone chargers & cable cases grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.