AstroTurf · Artificial Turf
SeeGreen 5 ft. W X 7 ft. L Green Polypropylene Astroturf
Lower concern, polypropylene base rarely requires PFAS, but no brand disclosure on treatments or backing adhesives.
SeeGreen's astroturf is polypropylene, a plastic polymer not inherently linked to PFAS manufacturing. However, AstroTurf brand provides no public statement on whether the product, its backing, or adhesive coating contains PFAS or water/stain treatments.
Shop AstroTurf on Amazon →Material
Polypropylene (PP) astroturf
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
Category baseline
other is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
The full breakdown
What it's made of and why it matters
This product is polypropylene (PP) fibers on a PP or polyethylene backing, typically adhered with polyurethane or latex. Polypropylene is a thermoplastic that resists moisture and many chemicals, which is why it's chosen for outdoor turf. However, PP degrades under UV exposure over time, and the adhesives binding fibers to backing can off-gas volatile organic compounds (VOCs) initially and break down after years of sun and temperature cycling. The backing layer and any infill materials (sand, rubber granules from recycled tires) are the main contamination vectors.
The brand's record and disclosure
AstroTurf is the original artificial turf brand with long market history, but the company provides no public toxicology data, certifications (e.g., Green Label Plus, GREENGUARD), or transparency on adhesive composition, backing materials, or infill recommendations for this specific 5x7 product line. No major recalls or health complaints tied to this exact model are established in public records. Lack of disclosure is the primary concern rather than evidence of unsafe design.
How it compares in its category
Polypropylene astroturf is mid-range in durability (typically 7-10 years before noticeable degradation versus 10-15 years for premium nylon products). PP is lighter and less expensive than nylon but more prone to matting and UV fading. Many competitors now offer third-party certification or infill safety data; AstroTurf's silence on these is a relative weakness. Recycled rubber infill products from any manufacturer carry microplastic shedding concerns during use, especially in high-traffic zones or heat.
If you buy it
Install on a permeable base (not sealed concrete) to allow water drainage and avoid bacterial growth or mold underneath. Keep away from heat sources (grills, direct flame) as PP softens around 150°C. Rinse regularly with water to reduce dust and particulate accumulation; do not use harsh solvents. Inspect seams and backing annually for separation or adhesive breakdown; replacement is warranted if backing is visibly degraded or fibers pull free easily. If using infill, verify it does not contain lead or asbestos (older recycled rubber products), and minimize barefoot contact if infill contains microplastics.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
VOC off-gassing from polyurethane or latex adhesive
Initial installation may release odors and low-level VOCs over the first weeks indoors or in poorly ventilated enclosures. Outdoor use minimizes exposure. No brand data on adhesive type or off-gassing limits is publicly available.
Polypropylene UV degradation and microplastic shedding
PP fibers break down under sun, especially in high-heat climates, releasing microplastics into soil and groundwater over 7-10 years. Rate varies by UV index and product thickness, but is inherent to the material and cannot be fully prevented.
Backing adhesive failure and fiber separation
Polyurethane adhesives commonly fail after 5-8 years of temperature cycling and moisture exposure, leading to fiber pull-out and potential ingestion risk for small children or pets playing on degraded turf.
Infill contamination (if rubber granules used)
Recycled tire rubber infill can shed heavy metals (zinc, cadmium) and microplastics, particularly under heat and friction. AstroTurf does not specify approved infill types for this model, creating user risk if low-quality recycled rubber is chosen.
Mold and bacterial growth in damp backing layers
If installed on sealed or poorly draining base, moisture retention under the PP backing can foster mold and mildew. No brand-specific antimicrobial treatment is disclosed for this product.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
More artificial turf grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.