Anker · Waterproof Phone Chargers & Cable Cases
Anker USB-C to USB-C Cable 2-Pack
Lower concern. Standard USB cable with no known PFAS-risk materials.
Anker USB-C cables use standard PVC and copper construction without coating treatments that typically contain PFAS. No public evidence of PFAS presence or brand PFAS disclosure.
Shop Anker on Amazon →Material
PVC outer jacket, copper conductors, standard connectors
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
Category baseline
other is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
The full breakdown
What it's made of and why it matters
This cable uses a PVC (polyvinyl chloride) outer jacket over copper conductors, typical for mass-market USB cables. PVC is a common, inexpensive polymer chosen for flexibility and cost rather than performance. The connectors are standard molded plastic housings with metal contacts. No unusual material choices increase chemical leaching risk under normal charging conditions.
The brand's record and disclosure
Anker is a major consumer electronics accessory manufacturer with no widely documented safety violations or material recalls on USB cables. The company maintains basic FCC/CE certification for electrical safety but does not publish detailed material sourcing or chemical composition documentation. No specific controversies tied to cable safety or material hazards are on record. Silent on PFAS presence, consistent with most cable manufacturers in the category.
How it compares in its category
PVC-jacketed USB-C cables dominate the market due to cost and adequate performance for consumer use. Alternatives include thermoplastic elastomer (TPE) jackets, which may outperform PVC in flexibility but carry similar chemical profiles. Anker's pricing and reputation position this cable as mid-tier; it is neither premium-material nor budget-basement. Durability and failure modes are comparable to other mainstream brands in the same price range.
If you buy it
Inspect the cable regularly for cracks, exposed wires, or heat damage, especially near connectors where stress concentrates. Avoid coiling tightly or bending at sharp angles, which accelerates jacket cracking and internal wire fracture. Do not expose to direct heat sources or extreme temperatures above 60°C (140°F), as PVC softening can occur. Replace immediately if the outer jacket shows tears or copper is visible; continued use poses electrical hazard rather than chemical risk.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
PVC plasticizer migration
PVC cables do not typically contact food or skin during normal charging use, so plasticizer leaching (e.g., phthalates) is not a documented concern for this product category. Risk is negligible in dry, ambient conditions.
Copper conductor corrosion and oxidation
Exposed copper at connectors or from jacket damage can oxidize, reducing conductivity and increasing resistance, which generates heat. This is a functional failure mode rather than a toxicological hazard, but degraded cables may pose low electrical safety risk over extended use.
Connector housing material composition
Standard molded plastic connectors on USB-C cables are not routinely tested or disclosed for heavy metals or off-gassing. No recalls or established hazards are on record for Anker cables or this product type.
Thermal degradation of PVC jacket
Prolonged exposure to heat (from device charging or ambient temperature) can soften PVC and release volatile compounds, though concentrations remain far below occupational thresholds in consumer use. Risk is mainly during equipment failure or misuse.
Microplastic shedding from jacket wear
PVC jackets can fragment over time with repeated bending and mechanical stress, shedding small plastic particles. No health endpoint is established for incidental contact; disposal of worn cables should route them to e-waste rather than landfill or incineration.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 78% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
Safer alternatives in Waterproof Phone Chargers & Cable Cases
Nomad
Universal Cable
Braided nylon and metal connectors
Lower concern. Nylon cable has minimal PFAS risk.
✓Naturally PFAS-free material
More waterproof phone chargers & cable cases grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.