Rooms to Go · Recliners
La-Z-Boy Collage Manual Rocking Recliner
Lower PFAS concern for this category, but no disclosure from brand, typical for furniture.
Recliners like this are typically upholstered fabric over foam and wood, which carry lower inherent PFAS risk than waterproofed apparel or nonstick cookware. La-Z-Boy (and Rooms to Go) do not publicly disclose PFAS-related information or certifications for this model.
Shop Rooms to Go on Amazon →Material
upholstered fabric, foam, wooden frame
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Category baseline
furniture is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
The full breakdown
What it's made of and why it matters
This recliner combines a wooden frame, polyurethane foam cushioning, and upholstered fabric covering. Polyurethane foam in furniture commonly off-gases volatile organic compounds (VOCs) during the first weeks to months of use, which is normal but can cause temporary odors and respiratory irritation in sensitive individuals. The fabric type (synthetic or natural blend) determines whether formaldehyde-based finishes or flame retardant chemicals are present in the textile itself. Rooms to Go does not publicly disclose the specific foam formulation or fabric treatment standards for this model.
The brand's record and disclosure
Rooms to Go is a large U.S. furniture retailer with no major published recalls or safety controversies specific to chemical hazards in their upholstered lines. However, the brand does not maintain publicly visible certifications (such as CertiPUR-US for foam or Oeko-Tex for fabrics) or transparency statements about flame retardants, formaldehyde, or other regulated chemicals. This silence is typical for mass-market furniture but leaves consumers without third-party verification of compliance.
How it compares in its category
La-Z-Boy recliners (including this Rooms to Go-branded model) sit in the mid-market segment where chemical safety disclosure is inconsistent industry-wide. Premium brands often pursue CertiPUR-US certification or Greenguard Gold labeling; budget alternatives rarely do. This product offers no visible competitive advantage in transparency, placing it in the mainstream baseline where buyers must assume standard industry practices rather than expect documentation.
If you buy it
Unbox and air the recliner in a well-ventilated space (ideally outdoors or near an open window) for 48 to 72 hours before extended use to minimize VOC inhalation during the off-gassing period. Avoid placing it in direct sunlight, which degrades upholstery and foam over time. Vacuum and spot-clean the fabric regularly to prevent dust and allergen accumulation. If foam or seams show visible deterioration within a few years, consider replacement or professional reupholstering, as degraded foam can release additional dust particles and odors.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Volatile Organic Compounds (VOCs) from polyurethane foam
Polyurethane foam in upholstered furniture routinely off-gasses VOCs including toluene and isocyanates in the first weeks after manufacture and delivery. Rooms to Go does not specify whether the foam meets low-VOC standards (CertiPUR-US would limit this); off-gassing is typically mild but may trigger symptoms in chemically sensitive individuals.
Flame retardants in fabric or foam
Upholstered furniture in the U.S. must meet Federal flammability standards (16 CFR 1633 for seating). Rooms to Go does not disclose whether flame retardants used are halogenated (higher concern) or non-halogenated (lower concern), nor whether the brand has phased out older brominated compounds. Many mass-market recliners still contain these chemicals without label transparency.
Formaldehyde in fabric finishing or adhesives
Formaldehyde-releasing resins are common in synthetic upholstery and foam adhesives to provide wrinkle and mildew resistance. No public information confirms or denies use in this specific Rooms to Go model; standard industry practice suggests possible presence at low levels that typically off-gas over time.
Foam or fabric degradation and dust generation
Like all polyurethane-foam recliners, this model may eventually shed microparticles of foam or fabric as the cushioning compresses and covers wear. This is a long-term mechanical hazard rather than acute chemical risk but contributes to indoor dust and potential inhalation exposure, especially after 3 to 5 years of regular use.
Adhesive and binding chemical off-gassing
Synthetic glues and contact adhesives used to bond frame to foam and fabric can emit low levels of solvents (including ethyl acetate and hexane). No disclosure from Rooms to Go on adhesive type; mass-market furniture typically uses solvent-based industrial adhesives rather than water-based alternatives.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
More recliners grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.