75/ 100
C
OverallF59/100
Ashley STONEMEADE ROCKER RECLINER

Ashley Furniture · Recliners

Ashley STONEMEADE ROCKER RECLINER

C · Moderate

Lower concern, typical upholstered furniture with no known PFAS triggers, but zero transparency from Ashley.

Verdict: Buy with careStandard upholstered recliner with typical foam and fabric; no major recalls on record, but Ashley lacks transparency on flame retardants and chemical treatments.

The Ashley Stonemeade Rocker Recliner is a standard upholstered armchair with fabric, foam, and wood construction. No Teflon-type coating, waterproofing treatment, or stain-resistant finish is indicated in public materials.

Shop Ashley Furniture on Amazon →

Material

fabric upholstery, foam cushioning, wooden frame

Brand disclosure

Brand is silent on PFAS

Lab data

No public lab test

Why this grade

Category baseline

furniture is a category where PFAS exposure is more common.

Hurts the grade

No PFAS disclosure

No public statement about PFAS in this product.

Hurts the grade

Safe base material

Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).

Helps the grade

The full breakdown

What it's made of and why it matters

The STONEMEADE ROCKER RECLINER combines a wooden frame, polyurethane foam cushioning, and fabric upholstery (material composition varies by colorway but typically polyester blend or microfiber). Polyurethane foam is a common cushioning material in recliners but may contain flame retardant chemicals that off-gas, especially in new furniture. Fabric treatments for stain resistance and durability are standard in this price category, but Ashley does not publicly disclose which chemical families are used.

The brand's record and disclosure

Ashley Furniture is one of the largest furniture manufacturers in North America but has not published detailed material safety data sheets or flame retardant ingredient lists for upholstered pieces. The brand has no known major recalls specifically tied to chemical hazards in recent years, and it does comply with federal flammability standards (16 CFR 1633 for foam, 16 CFR 1632 for cover fabric). However, compliance with minimum standards does not mean absence of chemical treatments; Ashley's silence on formulation details is typical for the mass-market furniture sector but offers consumers no reassurance beyond regulatory baseline.

How it compares in its category

Mid-range recliners from Ashley, La-Z-Boy, and comparable retailers share similar material palettes and manufacturing practices. This model sits in the standard commercial upholstery segment, not a premium or eco-certified tier. Competitors rarely disclose flame retardant content either, making direct comparison difficult; however, some brands (notably West Elm, Room & Board) now offer fabric/foam options free of legacy flame retardants as a selling point, suggesting that alternative formulations are commercially viable but not standard at Ashley's price point.

If you buy it

Air out the recliner in a well-ventilated space for 48-72 hours after delivery to allow initial off-gassing of foam and adhesive volatiles to diminish. Avoid exposing the fabric to direct sunlight or heat sources, as polyurethane foam can degrade and shed particles if overheated. Vacuum upholstery regularly to reduce dust and potential microfiber shedding, and use manufacturer-approved spot cleaners only. If the foam develops visible crumbling or a chemical smell persists beyond one week, contact Ashley customer service.

Beyond PFAS: other things we checked

Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”

Possible

Flame retardant chemicals (unspecified)

Polyurethane foam in this recliner is legally required to meet flammability standards, typically via brominated or chlorinated flame retardants or phosphate esters. Ashley does not disclose which class is used. These chemicals may off-gas in the first days to weeks; long-term indoor air impact is low after initial volatilization but varies by formulation and room ventilation.

Possible

Polyurethane foam degradation and particle emission

Over years of use, foam cushioning can break down, especially if exposed to heat, moisture, or UV light, potentially shedding particles. This is a durability concern more than acute toxicity, but prolonged contact with degraded foam may increase inhalation of microscopic foam particles.

Possible

Fabric treatment chemicals (unspecified)

Most commercial upholstery fabrics, especially polyester blends and microfibers, are treated with stain repellents and soil resistors (commonly perfluoroalkyl compounds or formaldehyde-releasing agents). Ashley does not specify treatments on this model. These off-gas minimally once applied and cured, but residual chemicals may transfer to skin with prolonged contact.

None known

Formaldehyde in adhesives and binders

Wood frames and fabric-to-foam bonding in recliners may involve formaldehyde-containing adhesives. No specific recalls or complaints linked to this model have been identified, and off-gassing from adhesives is typically minimal after manufacturing.

Possible

Bacterial or mold growth in foam if moisture trapped

If spills or humidity are not promptly managed, polyurethane foam can trap moisture and support microbial growth, particularly in humid climates. This is a maintenance issue rather than an inherent product defect but can develop without regular cleaning and drying.

What we don’t know

This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.

No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.

The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.

Formulations and coatings change between production runs. Always check the current label before buying.

More recliners grades

How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.