PXG · Golf Balls & Equipment
PXG Full Weight Metal Wood Kit
Golf clubs show lower PFAS concern. No coating triggers typical to warrant worry.
Metal woods are uncoated or minimally treated steel and graphite, inherent materials without typical PFAS-risk finishes. PXG provides no PFAS disclosure, but product category carries lower exposure risk than apparel or cookware.
Shop PXG on Amazon →Material
Steel clubheads, graphite shafts, rubber grips
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
Category baseline
other is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
The full breakdown
What it's made of and why it matters
PXG Full Weight Metal Woods use forged or cast steel clubheads, graphite composite shafts, and elastomer (rubber) grips. Steel is chemically inert under normal use and does not leach. Graphite composites are stable and do not off-gas volatile compounds during typical play. Rubber grips may contain trace additives (vulcanization agents, anti-degradants) but are not heated or ingested and pose no documented exposure risk.
The brand's record and disclosure
PXG (Parsons Xtreme Golf) does not publicly disclose material safety certifications, heavy metal testing, or PFAS content. The brand has no known recalls related to chemical contamination or toxic leaching. No independent third-party testing of PXG clubs for lead, cadmium, or other heavy metals in coatings has been published in consumer safety databases.
How it compares in its category
Golf clubs as a category carry minimal chemical risk compared to cookware, cosmetics, or textiles because they are not ingested, heated, worn against skin, or used in food preparation. Steel clubheads are inherently safer than some older painted or plated finishes that may have contained lead. Graphite shafts do not pose the off-gassing concerns associated with some synthetic foams or adhesives in other sporting equipment.
If you buy it
Store clubs in a dry environment to prevent rust and corrosion of the steel head, which could expose underlying material. Grips degrade over time from UV exposure and sweat; replace them every 1-2 years if heavily used. Inspect clubheads annually for paint chipping or pitting that might indicate coating failure, though this is a structural rather than safety issue. No special cleaning agents are needed; warm soapy water is sufficient.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Heavy metals in steel or coatings
Steel clubheads and standard finishes do not typically contain lead or cadmium; no test data or recalls exist for PXG clubs. Steel itself is chemically stable and does not leach under normal use conditions.
Graphite dust inhalation
Graphite composite shafts are sealed and do not shed particles during normal play. Risk would only arise if shaft is severely damaged or machined, which is not a typical consumer scenario.
Rubber grip degradation and additive release
Rubber grips contain vulcanization additives and anti-ozonants that may leach slightly when wet or when exposed to intense sun over years, but dermal contact risk is low and no adverse events are documented for golf grips.
Paint or plating toxicity
PXG clubheads use standard golf industry finishes; no lead-based paint or toxic plating has been reported. Cosmetic chipping does not constitute a chemical exposure risk in typical use.
Adhesive off-gassing from shaft-head bond
Golf club assembly uses epoxy or polyurethane adhesives that fully cure during manufacturing; no volatile organic compound (VOC) release is expected during consumer use or storage.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 78% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
More golf balls & equipment grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.