70/ 100
C
OverallF62/100
Pixie Cup - Soft, Safe, Reusable Menstrual Cup - Ranked 1 for The Best Tampon Alternative - 100% Medical-Grade Silicone Period Cup for Feminine Care -

Pixie Cup · Menstrual Cups

Pixie Cup - Soft, Safe, Reusable Menstrual Cup - Ranked 1 for The Best Tampon Alternative - 100% Medical-Grade Silicone Period Cup for Feminine Care -

C · Moderate

Lower PFAS concern, medical-grade silicone menstrual cups are not typical PFAS application; no flag.

Verdict: BuyMedical-grade silicone menstrual cups pose minimal established hazards; Pixie Cup's silent PFAS stance is standard for the category and does not elevate risk.

Pixie Cup is made of medical-grade silicone, a material not typically treated with PFAS coatings. Menstrual cups have no functional need for water-repellency, stain resistance, or non-stick properties that would warrant PFAS use.

Shop Pixie Cup on Amazon →

Material

100% medical-grade silicone

Brand disclosure

Brand is silent on PFAS

Lab data

No public lab test

Why this grade

Category baseline

period care is a category where PFAS exposure is more common.

Hurts the grade

No PFAS disclosure

No public statement about PFAS in this product.

Hurts the grade

Safe base material

Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).

Helps the grade

The full breakdown

What it's made of and why it matters

Pixie Cup is manufactured from 100% medical-grade silicone, a synthetic polymer approved by the FDA for prolonged internal contact with mucous membranes. Medical-grade silicone is inherently non-porous, non-absorbent, and chemically inert at body temperature, which means it does not leach plasticizers, BPA, or phthalates during normal use. Unlike latex or lower-grade rubbers, medical-grade silicone is not softened with chemical additives that can migrate into bodily fluids.

The brand's record and disclosure

Pixie Cup's manufacturer does not publicly disclose PFAS testing or third-party material certifications beyond the medical-grade silicone claim. The brand markets heavily on safety and FDA approval but provides no independent test results, ingredient transparency reports, or response to PFAS inquiry available in public records. This silence is typical for menstrual cup brands and does not constitute a red flag specific to Pixie Cup, as medical-grade silicone is not a common PFAS application and regulatory oversight of menstrual devices remains limited.

How it compares in its category

Pixie Cup occupies the mainstream medical-silicone tier, comparable to brands like Saalt, Lena, and Diva Cup in material safety profile. All established menstrual cups in this segment use food- or medical-grade silicone and report similar absence of BPA/phthalate hazards. Pixie Cup's marketing rank as 'number 1' is not independently verified and may reflect consumer reviews rather than objective safety testing; safety profiles are broadly equivalent across certified brands.

If you buy it

Rinse thoroughly with water before first use and after each removal; do not boil above 212°F or autoclave unless manufacturer confirms it, as high heat can degrade the surface finish over time. Replace the cup if you notice discoloration, stickiness, or loss of structural firmness, typically every 5-10 years with proper care. Store in a breathable cotton pouch or bag, not in airtight plastic, to prevent mold growth during storage between cycles. If you experience irritation, verify correct size and insertion depth; menstrual cups require learning curve and do not suit all anatomy.

Beyond PFAS: other things we checked

Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”

Possible

Coating or surface degradation over time

Medical-grade silicone surfaces can develop microscopic tears or sticky film from prolonged moisture exposure or improper cleaning (e.g., vinegar, essential oils). No field reports of Pixie Cup degradation are on public record, but silicone cups in general may lose smoothness after years of use, increasing discomfort or insertion friction.

Possible

Bacterial or yeast colonization if unmaintained

Silicone is non-porous but can harbor bacteria in crevices if not cleaned thoroughly or dried completely between use. This is a user behavior hazard, not a material defect; proper rinsing and air-drying mitigate risk. No specific Pixie Cup contamination incident is documented.

None known

Allergic contact dermatitis or irritation

Medical-grade silicone is hypoallergenic and approved for internal use; no reported cases of silicone allergy linked to Pixie Cup exist in available records. Irritation is more often caused by improper sizing, insertion depth, or individual anatomical sensitivity rather than material toxicity.

None known

Heavy metals in silicone (e.g., antimony, lead catalysts)

Medical-grade silicone manufacturers are required to use platinum or non-toxic catalysts; antimony or lead are not typical in food/medical silicone production. No independent testing of Pixie Cup for trace metals is publicly available, but the material class itself is not a known source of heavy metal leaching.

None known

Fragrance or additive sensitivity

Medical-grade silicone is not fragranced and contains no known perfume allergens or irritants in its base formulation. Some users apply external products (e.g., lubricants, washes) around the cup during insertion; the cup itself contributes no volatile organic compounds.

What we don’t know

This grade is a model-based estimate from public materials, coatings, and brand disclosure at 82% confidence. It is not a lab result.

No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.

The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.

Formulations and coatings change between production runs. Always check the current label before buying.

Safer alternatives in Menstrual Cups

DIVA Cup Model 2

Aisle

DIVA Cup Model 2

Medical-grade silicone (body); no Teflon-type coating or Teflon-family coating coatings

A
A
PFASAll
A · Very low PFAS1 flag

Lower-concern menstrual cup; silicone construction and PFAS-free commitment make it a reasonable choice.

MADE SAFE Certified

Verified PFAS-free by a third party

Ruby Cup Steriliser

Ruby Cup

Steriliser

Stainless steel heating chamber with silicone/plastic components

B
D
PFASAll
B · Low PFAS3 flags

Lower-concern menstrual cup sterilizer; stainless core typical for appliances, but silicone/plastic parts unspecified, contact brand for material detail.

Risky category by default

Ruby Cup Steriliser Purple

Ruby Cup

Steriliser Purple

stainless steel steriliser/heating element

B
C
PFASAll
B · Low PFAS2 flags

Lower PFAS concern; no high-risk coatings typical of this product category.

Risky category by default

More menstrual cups grades

How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.