75/ 100
C
OverallF63/100
Gowise Usa Pressure Cooker Replacement 6 Qt Inner Pot / Rack +

GoWISE USA · Pressure Cookers

Gowise Usa Pressure Cooker Replacement 6 Qt Inner Pot / Rack +

C · Moderate

Lower PFAS concern, stainless steel cookware has no intentional fluorochemical coating.

Verdict: BuyStainless steel inner pot poses minimal chemical hazard; no coating degradation risk. Standard pressure cooker safety applies.

This GoWISE USA replacement inner pot and rack are stainless steel, a material not typically treated with PFAS. The brand provides no PFAS disclosure, but the plain metal construction poses lower risk than nonstick-coated cookware. Standard stainless steel pressure cookware does not require Teflon-family coating coatings to function.

Shop GoWISE USA on Amazon →

Material

Stainless steel inner pot and rack

Brand disclosure

Brand is silent on PFAS

Lab data

No public lab test

Why this grade

Uncoated safe material

Bare, uncoated material (cast iron, stainless, carbon steel, or glass) with no surface treatment to contain PFAS.

Helps the grade

Category baseline

cookware is a category where PFAS exposure is more common.

Hurts the grade

No PFAS disclosure

No public statement about PFAS in this product.

Hurts the grade

The full breakdown

What it's made of and why it matters

This replacement pot is 300-series stainless steel (likely 18/8 or 18/10 chromium-nickel blend), which is inert and does not leach metals under normal cooking conditions. Stainless steel has no polymer coating, enamel, or ceramic glaze that can degrade, peel, or release hazardous compounds into food. The rack is also stainless steel, so no secondary material concerns exist in the cooking vessel itself.

The brand's record and disclosure

GoWISE USA is a small consumer appliance brand with minimal public safety disclosures or third-party certifications on record. No major recalls or substantiated safety complaints specific to this pot model have entered public databases. The brand does not publish material sourcing or coating composition details, which is typical for budget cookware lines but limits transparency.

How it compares in its category

Stainless steel pressure cooker pots are the safest material choice in the category, avoiding risks posed by non-stick Teflon-type coating coatings (fume risk if overheated), aluminum (leaching under acidic conditions), or enameled cast iron (glaze degradation). This replacement pot performs identically to OEM stainless alternatives from higher-priced brands in terms of material safety.

If you buy it

Inspect the pot seals and gaskets (rubber components, not part of this listing) for cracks or hardening before each use; replace per manufacturer schedule, typically annually. Hand-wash the pot and rack rather than dishwasher to extend gasket life. Do not exceed the maximum fill line (typically two-thirds capacity for pressure cooking); overfilling can damage seals. Stainless steel does not require seasoning and resists scratching, but avoid abrasive scourers that can create cosmetic pitting without safety consequence.

Beyond PFAS: other things we checked

Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”

Possible

Gasket/seal degradation

Pressure cookers rely on rubber gaskets to maintain seal integrity; this replacement pot may arrive with aged or defective gaskets not visible on arrival. Inspect carefully and replace if hardened, cracked, or discolored before pressurizing.

None known

Stainless steel leaching (minor metals)

300-series stainless steel does not leach chromium, nickel, or iron at cooking temperatures under normal use. Some individuals with severe nickel sensitivity may detect trace nickel in water stored long-term in stainless pots, but this is not a food safety hazard.

None known

Coating or plating failure

Bare stainless steel has no applied coating, enamel, or plating to degrade, chip, or release contaminants. Material degradation hazard is absent by design.

Possible

Pressure system over-pressurization

If this replacement pot is paired with an older or mismatched pressure cooker lid or safety valve, pressure buildup could exceed safe limits. Verify compatibility with your specific cooker model before use.

Possible

Thermal stress (welds and seams)

Repeated heating and cooling can stress welded seams in budget stainless cookware. Inspect seams for small cracks or weeping (slow liquid seepage) annually; replacement is warranted if detected.

What we don’t know

This grade is a model-based estimate from public materials, coatings, and brand disclosure at 75% confidence. It is not a lab result.

No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.

The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.

Formulations and coatings change between production runs. Always check the current label before buying.

Safer alternatives in Pressure Cookers

Zavor LUX Edge 6-Qt. Multicooker Cookbook

Zavor

LUX Edge 6-Qt. Multicooker Cookbook

Paper/cardboard cookbook; not cookware

B
C
PFASAll
B · Low PFAS1 flag

Not applicable, this is a cookbook, not cookware hardware.

Risky category by default

More pressure cookers grades

How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.