Flexsteel · Recliners
Flexsteel Classic Perfect Match Gliding Recliner
Lower PFAS concern likely, but Flexsteel does not disclose fabric treatments, contact manufacturer for specifics.
The Flexsteel Classic Perfect Match is a standard upholstered recliner with no known PFAS-intentional coatings (Teflon-type coating nonstick, Teflon-family coating). However, upholstery fabrics sometimes receive stain-resistant or water-repellent finishes that may contain PFAS.
Shop Flexsteel on Amazon →Material
upholstered fabric, foam padding, wood/metal frame
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Category baseline
furniture is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
The full breakdown
What it's made of and why it matters
This recliner combines a wood and metal frame, polyurethane foam padding, and upholstered fabric covering. The critical unknowns are whether the foam contains legacy brominated flame retardants (now mostly phased out but still used in some recliners) and what chemical adhesives bond the fabric to the foam. Polyurethane foam itself can off-gas volatile organic compounds (VOCs), especially when new. The fabric type (synthetic blend vs. natural) affects both off-gassing potential and durability under body heat and friction.
The brand's record and disclosure
Flexsteel is a mid-range US furniture manufacturer with no widely documented safety recalls or certifications (such as CertiPUR-US for foam or Global Organic Textile Standard) visible in public records for this model. The brand does not publicly disclose flame retardant chemistry, foam supplier standards, or fabric treatment details on product pages or labels reviewed. Contacting the manufacturer directly is necessary to obtain Material Safety Data Sheets or ingredient transparency on adhesives and finishes.
How it compares in its category
Upholstered recliners in this price segment typically lack third-party foam or textile certifications, making Flexsteel unremarkable in disclosure practices. Higher-end competitors often carry CertiPUR-US or Oeko-Tex labels; budget alternatives may carry comparable or worse undisclosed chemical loads. The reclining mechanism itself introduces wear points where padding and fabric compress repeatedly, accelerating potential microfiber shedding and adhesive degradation over 5-10 years.
If you buy it
Air out the recliner indoors for 48-72 hours before regular use to reduce initial VOC off-gassing, especially if you have asthma or chemical sensitivity. Avoid placing it in direct sunlight or near heating vents, as foam degradation accelerates with heat. Vacuum fabric monthly and spot-clean promptly to prevent soil accumulation that can trap moisture and promote bacterial growth in the padding. Request a Material Safety Data Sheet from Flexsteel for adhesives and flame retardant treatments before delivery if you have infants, pets, or respiratory concerns.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Flame retardants in polyurethane foam
Flexsteel does not disclose whether this model's foam uses brominated, chlorinated, or phosphorus-based flame retardants. Older polyurethane foam formulations (pre-2013) sometimes contained brominated compounds; current US standards allow phosphorus and other alternatives, but composition is not public for this product.
Volatile organic compounds (VOCs) from foam and adhesives
New polyurethane foam and polyurethane-based adhesives commonly off-gas formaldehyde, toluene, and other VOCs during the first weeks of use. No off-gassing test data is available for this model, but typical upholstered furniture in this category reports detectable VOC emissions within the first 2-3 months.
Fabric degradation and microfiber shedding
Reclining action creates repeated mechanical stress on the upholstery seams and fabric surface. Over time, synthetic fabrics can shed microfibers into indoor air and accumulate in the padding where they may not be cleanable. This is not a documented recall issue for Flexsteel but is a known wear pattern in high-motion furniture.
Adhesive and finish leachables
No public records indicate leaching of adhesive chemicals (e.g., formaldehyde from urea-formaldehyde resins) from Flexsteel recliners. However, the brand does not certify adhesive formulations, so long-term off-gassing potential under humid conditions is not independently verified.
Mold and bacterial growth in padding
If the recliner is exposed to moisture (spills, high humidity) and not dried promptly, the dense foam core can trap water and support microbial growth. Flexsteel does not advertise antimicrobial treatments, so standard polyurethane foam is vulnerable once saturated.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 68% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
More recliners grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.