Apple · Waterproof Phone Chargers & Cables
Apple MagSafe Charger
Lower concern. No PFAS-typical applications in charger design.
MagSafe charger uses silicone, plastic, and metal without water-repellent or non-stick coatings where PFAS is commonly added. Apple does not disclose PFAS status, but material composition poses minimal typical PFAS risk.
We flunk more products than we pass. This one earned its grade. How we grade
Material
Silicone, plastic (USB-C/Lightning connector), copper wire coil
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
Category baseline
other is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
The full breakdown
What it's made of and why it matters
The MagSafe Charger uses medical-grade silicone exterior, plastic housing (likely polycarbonate or ABS), and internal copper wire coils. Silicone is chemically inert at room temperature and does not leach plasticizers, BPA, or phthalates under normal use. The plastic connector components and internal housing are typical for consumer electronics and pose minimal leaching risk in a non-heated, non-food-contact application. Copper coils are sealed and not in contact with skin or consumables.
The brand's record and disclosure
Apple publishes environmental and restricted substance declarations for consumer electronics, including chargers. The company has phased lead and cadmium from manufacturing and adheres to RoHS (Restriction of Hazardous Substances) compliance for EU and similar markets. However, Apple does not publicly detail PFAS screening or make explicit claims about PFAS avoidance in charger components. Third-party testing or independent certifications specific to this charger model are not widely documented in public sources.
How it compares in its category
Wireless chargers as a category carry minimal chemical hazard compared to cookware or cosmetics because they do not contact food, skin prolonged, or release fumes. The MagSafe design is simpler than many competing wireless chargers, reducing internal plastic and coating complexity. Most consumer wireless chargers use similar silicone and plastic materials; Apple's choice of medical-grade silicone is on the premium end and suggests lower off-gassing potential.
If you buy it
Use the charger in normal indoor conditions and avoid prolonged exposure to direct sunlight or heat above 40C, which can degrade silicone and plastic over many years. Clean the charging surface periodically with a dry cloth to prevent dust or metal particle buildup that could interfere with magnetic coupling. If the silicone exterior cracks or the plastic housing shows visible wear or discoloration, discontinue use to avoid internal component exposure. Store in a cool, dry place and do not bend or strain the internal wire coils.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Plastic housing degradation over time
ABS or polycarbonate plastic may become brittle and crack after 3-5 years of use, especially if exposed to heat or UV. Degradation itself is not an acute hazard but could expose internal wire or coatings.
Silicone off-gassing (volatile organic compounds)
Medical-grade silicone does not typically emit detectable VOCs under normal indoor temperatures. No recalls or complaints for off-gassing from MagSafe Charger are on record.
Electromagnetic field exposure
The charger operates at low power (typical 15W) and generates non-ionizing electromagnetic fields well below regulatory limits (FCC, CE). No health hazard is established at the exposure levels from typical wireless chargers.
Copper coil corrosion or oxidation
Copper is sealed inside the housing and not exposed to moisture or air under normal use. Risk of corrosion leaching into user contact is negligible.
Connector metal allergies or contact dermatitis
The USB-C or Lightning connector may contain nickel or other base metals; individuals with documented metal sensitivities could experience mild contact irritation with repeated touching. Risk is low for brief contact.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
More waterproof phone chargers & cables grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.