Casetify · Waterproof Phone Chargers & Cables
Chiikawa D2 x CASETiFY PowerThru Magnetic Wireless Charger
Electronics charger with no known PFAS risk signals identified.
Wireless chargers typically use plastic housings and metal coils without intentional PFAS treatment. No public disclosure or third-party testing available for this specific product.
Shop Casetify on Amazon →Material
Wireless charger, metal and plastic components
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
Category baseline
other is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
The full breakdown
What it's made of and why it matters
This is a wireless charging pad combining plastic housing (likely polycarbonate or ABS), internal metal coils, and a circuit board. The exterior plastic and any adhesives used in assembly are the primary contact surfaces; modern chargers rarely use lead-based solder or cadmium plating in coils due to RoHS compliance (enforced in EU and widely adopted elsewhere). The metal components are typically copper or ferrite-based, low-toxicity by design. Heat generation during charging is minimal and localized to the internal circuit, not the surface where your phone rests.
The brand's record and disclosure
Casetify is a consumer electronics accessories brand with no established public record of chemical disclosure statements or third-party environmental certifications (e.g., no noted participation in GreenGuard or similar programs). The brand has not announced specific PFAS or flame-retardant policies that are publicly available. No major product recalls or safety violations tied to chemical contamination have surfaced for their chargers. The collaboration with Chiikawa (a character brand) does not introduce known additional chemical risk factors beyond standard charger construction.
How it compares in its category
Wireless chargers as a category carry minimal chemical hazard compared to cookware, cosmetics, or textiles because the product does not directly contact food, skin, or absorb liquids. The Casetify unit is in line with mainstream consumer chargers from companies like Belkin, Anker, and Apple; all rely on similar plastic and circuit materials with no inherent toxic advantage or disadvantage. Brand-level transparency about materials and flame retardants is limited across the entire category, so this charger is neither ahead nor behind market norms.
If you buy it
Avoid prolonged contact between the charger and flammable materials (fabric, paper) to prevent heat accumulation. Do not disassemble or expose internal components to moisture. Keep away from direct sunlight if stored long-term, as UV can degrade the plastic housing over years, though this does not immediately release toxins. If the charger becomes warm to the touch (above 50°C / 122°F) during normal use, discontinue use and contact the manufacturer; this suggests internal fault, not chemical contamination, but indicates a defect.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Plastic housing degradation
ABS or polycarbonate can degrade under heat stress over extended use (2-3+ years), potentially releasing low levels of volatile compounds. Risk is minimal during normal room-temperature storage and charging but increases if the device is left in hot environments or near heat sources.
Flame retardants in circuit board substrate
Modern circuit boards in consumer chargers typically comply with halogen-free flame retardant standards (IEC 61937), but Casetify has not publicly disclosed which specific flame retardant chemistry is used. No independent testing data for this specific model is available, so residual risk cannot be ruled out but is not reported.
Solder and internal metallurgy
RoHS compliance (widely enforced) rules out lead solder in chargers sold in major markets. Copper and ferrite coils are low-toxicity. No evidence of cadmium or antimony in charger electronics exists, and no recalls have been issued for this brand.
Adhesives and glues in assembly
Epoxy or polyurethane adhesives used to bond plastic and circuit components may release trace amounts of volatile organics (VOCs) during the first weeks of use, particularly if stored in warm conditions. This is typical for electronics and dissipates quickly; no specific composition is disclosed by Casetify.
Electromagnetic field exposure
Wireless chargers emit low-level radiofrequency energy; no established evidence links consumer-grade wireless chargers to health harm at normal use distances. This is a physics concern, not a chemical hazard, and falls outside the scope of toxicological safety.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 62% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
More waterproof phone chargers & cables grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.