Wilson · Golf Equipment & Balls
Wilson Men's Profile Complete Golf Set
Golf clubs carry minimal PFAS risk; no coatings typically require forever chemicals.
Golf club sets primarily use steel, graphite, and rubber with no known water-resistant or nonstick coatings requiring PFAS. Wilson has not disclosed PFAS information, but product materials present lower concern than apparel or cookware.
We flunk more products than we pass. This one earned its grade. How we grade
Material
Steel clubheads, graphite shafts, rubber grips
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
Category baseline
other is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
The full breakdown
What it's made of and why it matters
Wilson Profile Complete sets use steel clubheads (typically stainless or carbon steel alloys), graphite composite shafts, and synthetic rubber grips. Steel is inert and does not leach chemicals during normal use. Graphite shafts are composite materials (graphite fibers in resin matrix) but are sealed and not in contact with food or skin in a way that would trigger leaching. Rubber grips may contain synthetic polymers and curing agents, but they are exterior-facing, non-ingestion contact only.
The brand's record and disclosure
Wilson, owned by Amer Sports, does not maintain public transparency specifically about chemical composition in golf club materials. No major recalls, REACH violations, or lead/heavy metal contamination cases are on record for Wilson golf club sets. The brand is not known for formal third-party certifications in sports equipment (e.g., no NSF or CPSIA claims for golf clubs, which fall outside strict consumer product regulations in most jurisdictions).
How it compares in its category
Golf clubs as a category carry minimal chemical hazard compared to cookware, textiles, or cosmetics because they are non-food-contact, non-absorbent-skin-contact items with long replacement cycles. Steel and graphite equipment is standard across the industry (Callaway, Titleist, TaylorMade). The Profile set's mixed-material construction is typical; no material choice here deviates toward higher-risk alternatives.
If you buy it
Store clubs in a dry location to prevent corrosion of steel clubheads and degradation of grip material; moisture can cause rubber to crack or harbor mold over years of use. Replace grips every 3-5 years or when they become slick, cracked, or discolored, as deterioration affects playability and hygiene. Avoid prolonged exposure to extreme heat (e.g., closed car trunks in summer) as this can soften resin bonds in graphite shafts; cool, moderate storage extends equipment life.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Graphite shaft resin degradation and fiber exposure
Graphite composite shafts are sealed in normal condition, but damage (cracks, splintering) could theoretically expose resin or fibers. Risk is low if clubs are maintained and replaced before structural failure, and exposure would be incidental hand contact, not ingestion.
Rubber grip deterioration and skin contact
Synthetic rubber grips can degrade over 5-10 years, becoming tacky, discolored, or cracked. Aged rubber may release low levels of volatile compounds or trigger contact dermatitis in sensitive users. Regular replacement mitigates this.
Lead or heavy metal content in steel alloys or plating
Stainless steel clubheads are not typically leaded; no recalls or test results indicate heavy metal contamination in Wilson Profile sets. Standard golf club manufacturing does not involve lead solder or cadmium plating.
Nickel or chromium sensitivity from steel clubheads
Steel alloys in clubheads may contain nickel or chromium, which can trigger contact dermatitis in sensitive individuals during prolonged grip contact. This is a material property of steel golf clubs across all brands, not specific to Wilson.
Volatile organic compound (VOC) off-gassing from resin or adhesives
New graphite and rubber components may emit low levels of VOCs during first weeks of use, but no documented health incidents or formal complaints are on record for Wilson golf club sets. Ventilation and use outdoors (as intended) minimizes any exposure.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 78% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
More golf equipment & balls grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.