Williams Sonoma · Stain-Resistant Textiles
Morris & Co. x Williams Sonoma Zorlue Tablecloth, 70x108, Compton, Multi
Lower concern tablecloth; typical printed cotton unlikely to contain PFAS.
Morris & Co. x Williams Sonoma tablecloth is a printed cotton blend with no disclosed water or stain treatments. No PFAS information available from brand, but untreated or minimally treated cotton textiles typically pose lower PFAS risk.
Shop Williams Sonoma on Amazon →Material
Cotton blend tablecloth, printed design
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
Category baseline
furniture is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
The full breakdown
What it's made of and why it matters
This is a cotton blend tablecloth with a printed design (Compton pattern). The cotton base is inherently low-hazard for food contact. The primary concern in printed textiles is the dyes and fixatives used to bond color to fibers. Cotton blends may include polyester, which can shed microfibers but poses no acute chemical risk in tablecloth use. No information on record indicates this specific product uses reactive dyes known to contain azo compounds or heavy metal pigments.
The brand's record and disclosure
Williams Sonoma does not publicly disclose detailed chemical composition or third-party textile certifications for this tablecloth line. The brand has no known major recalls or safety controversies specific to printed textiles. No statement on formaldehyde-resin finishing or azo-dye avoidance is available. This silence is typical for home goods retailers and does not indicate a problem, only limited transparency.
How it compares in its category
Printed cotton-blend tablecloths are mainstream consumer goods with no inherent safety disadvantage versus unprinted cotton. Certified organic or OEKO-TEX certified alternatives exist but command higher prices and are not required for safe use. This product sits in the standard commercial tablecloth tier with typical manufacturing controls. No evidence suggests it poses greater risk than comparable department-store or specialty-retailer printed linens.
If you buy it
Wash before first use to remove loose dyes and any finish residue. Use warm (not hot) water and mild detergent; hot water does not increase safety but can accelerate fading. Avoid prolonged contact with wet fabric on skin if you have dye-sensitive skin (rare but documented). Tablecloths are not food-contact surfaces in normal use, so residual ink or dyes present negligible ingestion risk. Replace if visible deterioration, staining, or mold develops.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Azo dyes and heavy metal pigments in print
No public record of azo dyes or cadmium/lead-based pigments in Williams Sonoma printed linens. Reputable textile manufacturers have largely phased out these inputs, but no certification or test data is available for this specific product.
Formaldehyde-resin finishing agents
Cotton-blend printed textiles may be treated with formaldehyde-based dye fixatives or wrinkle resistance finishes. Off-gassing is typically minimal after washing and dissipates over time. No specific data on this product's finishing chemistry is disclosed.
Microfiber shedding from polyester blend
If the blend contains polyester, washing will release synthetic microfibers, but this poses no chemical toxicity to household use. Environmental impact of microplastics is documented but outside the scope of consumer product safety hazard assessment.
Flame retardant coatings
Tablecloths are not subject to furniture flame-retardant regulations. No indication this product carries added flame retardants. Cotton itself has moderate flame resistance and does not require chemical treatment for consumer tablecloth compliance.
VOC off-gassing from dyes or sizing
Newly printed textiles may emit trace volatile organic compounds from residual dyes or starch sizing. Pre-wash before use and air-dry in a well-ventilated space to minimize any short-term exposure. Off-gassing is typically negligible within 48 hours of first laundering.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
More stain-resistant textiles grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.