Thermos · Insulated Travel Mugs
THERMOS Stainless Steel King Travel Mug
Lower concern. Bare stainless steel has minimal PFAS risk.
Thermos King mugs use stainless steel and plastic construction with no known nonstick or water-repellent coatings. No brand PFAS disclosure; standard materials pose lower risk than coated alternatives.
Shop Thermos on Amazon →Material
Stainless steel interior and exterior, plastic lid
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Uncoated safe material
Bare, uncoated material (cast iron, stainless, carbon steel, or glass) with no surface treatment to contain PFAS.
Category baseline
other is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
The full breakdown
What it's made of and why it matters
The Thermos King uses 18/8 stainless steel (304-grade), which is corrosion-resistant and chemically inert at normal use temperatures. The interior and exterior are both metal, eliminating ceramic glazes, non-stick coatings, and direct food-contact polymers that typically introduce heavy metals or synthetic compounds. The plastic lid is the sole polymer interface; typical travel mug lids use polypropylene or BPA-free copolyester, neither of which leaches measurably at cold or warm (not boiling) liquid temperatures.
The brand's record and disclosure
Thermos (owned by Groupe SEB) maintains minimal public chemical disclosure on their website but has no documented recalls for leaching, off-gassing, or coating failure in stainless steel travel mugs. The company does not actively promote third-party certification (e.g., NSF, BPA-free labeling) but stainless steel products face lower regulatory scrutiny than non-stick or ceramic lines. No established controversies specific to the King model exist in independent product safety databases.
How it compares in its category
All-stainless insulated mugs are among the safest in the drinkware category because they eliminate ceramic glazes (lead/cadmium risk), Teflon-type coating coatings (fume risk if overheated), and aluminum-only construction (leaching at low pH). The plastic lid is standard across most competitors; cheaper alternatives sometimes use polycarbonate (BPA precursor) or lower-grade polymers that off-gas in sunlight. Thermos stainless models occupy the middle-to-premium tier and are materially equivalent to brands like Hydro Flask or Klean Kanteen in core safety.
If you buy it
Hand-wash the plastic lid with mild soap; dishwasher heat can degrade polymer seals over time. Do not leave boiling liquids in a sealed lid for extended periods, as pressure buildup and lid material stress may occur. Replace the lid if threads crack or seal gaskets become visibly degraded (typically 2-3 years with daily use). The stainless steel body is essentially permanent; the lid is the wear item.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Plastic lid polymer degradation
Repeated dishwasher cycles or exposure to very hot liquids can degrade the polypropylene lid over months to years, potentially releasing trace polymer particles. This is cosmetic and functional degradation rather than acute toxicity, but replacement becomes necessary.
Stainless steel corrosion (interior pitting)
304-grade stainless steel is highly resistant to corrosion from water, tea, coffee, and juice under normal conditions. No established recalls or complaints about interior rust or pitting in Thermos King models; risk only arises if left with salt water or strongly acidic liquids for weeks.
Gasket/seal material composition
The rubber or silicone gasket in the lid lid is not disclosed by Thermos. Standard food-grade silicone or EPDM are used by most manufacturers and are safe, but trace off-gassing under heat is theoretically possible if non-food-grade material is substituted. No reported incidents.
Lead or cadmium contamination
Stainless steel itself contains negligible lead or cadmium. The plastic lid and gaskets are not decorated with glazes or paints, so pigment-based heavy metal contamination is not a pathway for this product.
Thermal shock stress on seals
Rapid temperature changes (hot liquid immediately sealed, then placed in freezer) can stress polymer gaskets and seals. This is unlikely to cause acute release of hazardous compounds but may accelerate degradation and eventual seal failure.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 82% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
Safer alternatives in Insulated Travel Mugs
Corkcicle
Coffee Mug
Stainless steel interior, insulated walls with cork/polymer exterior
Lower concern. Stainless steel interior poses minimal PFAS risk.
✓Naturally PFAS-free material
More insulated travel mugs grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.