75/ 100
C
OverallF59/100
Hemp White Curtain Panel 48"x120" by CB2

The Container Store · Curtains

Hemp White Curtain Panel 48"x120" by CB2

C · Moderate

Lower concern; natural hemp fiber has minimal typical PFAS risk unless treated with water-repellent coating finish.

Verdict: BuyHemp curtains carry minimal established hazard risk; natural fiber avoids synthetic coatings. Standard care and light inspection sufficient.

Hemp is a natural, untreated fiber with inherently low PFAS risk. CB2/Container Store does not disclose any water-repellent or stain-resistant treatments on this product.

Shop The Container Store on Amazon →

Material

Hemp (natural fiber)

Brand disclosure

Brand is silent on PFAS

Lab data

No public lab test

Why this grade

Category baseline

furniture is a category where PFAS exposure is more common.

Hurts the grade

No PFAS disclosure

No public statement about PFAS in this product.

Hurts the grade

Safe base material

Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).

Helps the grade

The full breakdown

What it's made of and why it matters

This product is woven from hemp fiber, a cellulose-based natural textile with no inherent toxicity concerns in its raw form. Hemp does not contain the synthetic polymers (polyester, acrylic) that carry flame retardants or antimony additives typical in conventional curtains. The main chemical exposure risk in hemp textiles comes from finishing treatments applied after weaving, such as dyes, sizing agents, and water-repellent coatings, not the fiber itself.

The brand's record and disclosure

CB2 (part of Crate and Barrel) has not published a formal chemical disclosure policy or sustainability report specific to this product line. The Container Store does not maintain a public PFAS or SVOC (semi-volatile organic compound) commitment on record. No recalls or safety complaints have been documented for this specific curtain product. Absence of disclosure does not indicate presence of hazards, but reflects limited transparency compared to certifiers like GOTS (Global Organic Textile Standard) or OEKO-TEX.

How it compares in its category

Hemp curtains occupy a lower-risk position than synthetic blends or fully polyester drapes, which often incorporate flame-retardant chemistries and antimony stabilizers. Unlike cotton-polyester blends, pure hemp avoids the durability trade-off that sometimes drives heavier chemical treatment. However, without third-party certification, this product cannot be verified to exclude heavy-metal dyes or formaldehyde-releasing finishing resins that may be used in conventional dyeing processes.

If you buy it

Wash new curtains before hanging to reduce residual dye volatiles and finishes; cold water with mild detergent is appropriate for hemp. Avoid extended heat exposure (do not drape over heat vents or radiators). Inspect seams and weave annually for fiber degradation; hemp is durable but may shed if abraded. Dry-cleaning is not necessary and may introduce chemical exposure; air drying is sufficient.

Beyond PFAS: other things we checked

Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”

Possible

Heavy-metal dyes

Hemp textiles can be dyed with azo dyes or metal-mordant dyes containing lead, cadmium, or chromium depending on manufacturer process. No independent test results are available for this specific CB2 product. OEKO-TEX certification (absent here) would exclude such heavy metals; standard commercial hemp does not guarantee avoidance.

Possible

Formaldehyde-releasing finish resins

Curtain sizing and crease-setting treatments may use formaldehyde-based resins to improve wrinkle resistance and dimensional stability. This is standard in conventional textile finishing and would off-gas gradually after purchase, particularly in warm or humid environments. New curtains should be aired out for 24-48 hours before extended contact with textiles.

Possible

VOC off-gassing from dyes and finishes

Volatile organic compounds (solvents, unreacted dye precursors, sizing agents) may off-gas from new hemp curtains. This is typically mild and resolves within days to weeks but may be noticeable in poorly ventilated rooms or sensitive individuals. Opening windows during and shortly after installation reduces exposure.

None known

Flame retardant treatment

Hemp curtains are not typically treated with brominated or phosphorus flame retardants due to natural fiber regulations and market positioning. No evidence exists that this CB2 product has been chemically flame-treated. Hemp's natural flame resistance is lower than synthetic fabrics, but not a hazard in typical residential use away from ignition sources.

Possible

Microfiber/fiber shedding

Hemp weaves can shed loose fibers, particularly if seams are stressed or if the weave is loose-construction. This is a nuisance rather than a toxicological hazard but may irritate those with textile sensitivities or asthma. Regular gentle vacuuming of the area below curtains minimizes accumulation.

What we don’t know

This grade is a model-based estimate from public materials, coatings, and brand disclosure at 78% confidence. It is not a lab result.

No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.

The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.

Formulations and coatings change between production runs. Always check the current label before buying.

Safer alternatives in Curtains

Privacy Curtain - Tranquility

Seventh Generation

Privacy Curtain - Tranquility

polyester with unspecified water-repellent treatment

A
B
PFASAll
A · Very low PFAS4 flags

Lower-concern option; Seventh Generation's MADE SAFE certification reduces but doesn't eliminate PFAS risk in treated textiles.

MADE SAFE

Verified PFAS-free by a third party

More curtains grades

How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.