100/ 100
A
OverallB88/100
Waterdrop Glass Water Filter Pitcher

SupaNatural · Pitcher Water Filters & Cartridges

Waterdrop Glass Water Filter Pitcher

A · Very low PFAS

Lower PFAS concern for the glass pitcher itself; filter media composition needs scrutiny.

Verdict: BuyBorosilicate glass pitcher poses minimal leaching risk; filter media composition opaque but activated carbon standard; brand silence on PFAS testing acceptable given glass housing.

Waterdrop's glass pitcher is made from borosilicate glass, an inherently lower-risk material unlikely to contain PFAS. However, the brand makes no public disclosure about PFAS content in filter cartridges (typically activated carbon and ion-exchange resin), which are the higher-risk component.

Shop SupaNatural on Amazon →

Material

Borosilicate glass pitcher, activated carbon + ion-exchange filter media

Brand disclosure

Brand is silent on PFAS

Lab data

No public lab test

Why this grade

No PFAS disclosure

No public statement about PFAS in this product.

Hurts the grade

Uncoated safe material

Bare, uncoated material (cast iron, stainless, carbon steel, or glass) with no surface treatment to contain PFAS.

Helps the grade

The full breakdown

What it's made of and why it matters

The pitcher itself is borosilicate glass, a chemically inert material that does not leach harmful substances into water under normal use conditions. The filter cartridge contains activated carbon and ion-exchange resin media, both widely used in consumer water filtration and generally recognized as safe contact materials. Borosilicate glass resists thermal shock and mechanical stress better than standard glass, making it durable for repeated fill-drain cycles. The glass-to-filter interface is the only potential concern point, but borosilicate does not react with standard filter plastics.

The brand's record and disclosure

SupaNatural has not published formal testing data or certifications for PFAS removal or absence in its filter media, which is typical for smaller water-filter brands and not inherently a red flag. The brand does not appear in major product-safety recall databases or regulatory enforcement actions related to water filtration products. No established controversies regarding heavy metals, microbial contamination, or material degradation have been documented in public sources. The lack of third-party NSF or WQA certification is a limitation but does not confirm a safety failure.

How it compares in its category

Glass-pitcher filters occupy a middle tier: safer than plastic-only pitchers (which carry BPA/BPS risk if low-quality) but less comprehensively tested than premium brands like Brita or PUR that conduct published contaminant-removal studies. The activated-carbon-plus-ion-exchange approach is standard across the category and performs adequately for chlorine, taste, and odor reduction in municipal water. Most competitors in this price range also omit detailed filter-media composition and PFAS testing, making SupaNatural unremarkable. The borosilicate glass is a genuine advantage over polycarbonate competitors for long-term durability and inertness.

If you buy it

Replace filter cartridges every 2-3 months or after 100 gallons to prevent bacterial biofilm growth inside spent media and maintain flow rate. Do not fill with water hotter than room temperature; borosilicate tolerates thermal shock well but rapid heating is unnecessary and stresses seals. Store out of direct sunlight to prevent algae growth in the glass bowl. Clean the pitcher body and lid weekly with soapy water, and rinse the filter housing each time you insert a new cartridge to remove carbon dust.

Beyond PFAS: other things we checked

Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”

Possible

Bacterial growth in unmaintained filter media

If cartridges are not replaced on schedule or the pitcher sits unused for extended periods, activated carbon can become a growth medium for bacteria and mold. This is not unique to SupaNatural but a known limitation of all gravity-fed pitcher filters lacking antimicrobial treatment.

None known

Filter cartridge plastic housing leachables

SupaNatural does not publicly specify the polymer type of the filter cartridge casing. Standard food-grade polypropylene or polyethylene are typical; no recalls or complaints documenting leaching from this brand's filters are on record.

Possible

Activated carbon dust ingestion

New filter cartridges can release small amounts of carbon particles into the first few pitchers of filtered water. Rinsing the cartridge under tap water before first use reduces but does not eliminate this; it is not a health hazard but causes visual cloudiness.

None known

Ion-exchange resin degradation and leaching

Ion-exchange resins are food-contact-approved in the United States, but SupaNatural does not disclose the specific resin type, binder chemistry, or testing for resin particle release. Standard food-grade resins pose no documented risk, but verification is not publicly available.

Possible

Seal and gasket degradation

The rubber or silicone seals between the filter head and glass pitcher can degrade with age and temperature cycling, potentially allowing unfiltered water to bypass the cartridge. This is a maintenance issue, not a material toxicity issue, but reduces filter efficacy over time.

What we don’t know

This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.

No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.

The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.

Formulations and coatings change between production runs. Always check the current label before buying.

More pitcher water filters & cartridges grades

How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.