85/ 100
B
OverallC77/100
Geekria Shield Earbuds Case for Skullcandy EcoBuds, Dime 2 / 3 Smokin'

Skullcandy · Waterproof Earbuds & Cases

Geekria Shield Earbuds Case for Skullcandy EcoBuds, Dime 2 / 3 Smokin'

B · Low PFAS

Lower concern. EVA foam unlikely to contain PFAS, but brand offers no assurance.

Verdict: BuyEVA foam case presents minimal established hazards; no brand safety controversies on record. Low-risk protective accessory.

Geekria Shield cases are hard EVA foam shells, a material category with lower PFAS risk. No brand disclosure on PFAS treatment or coatings.

Shop Skullcandy on Amazon →

Material

EVA foam case shell

Brand disclosure

Brand is silent on PFAS

Lab data

No public lab test

Why this grade

Safe base material

Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).

Helps the grade

Category baseline

other is a category where PFAS exposure is more common.

Hurts the grade

No PFAS disclosure

No public statement about PFAS in this product.

Hurts the grade

The full breakdown

What it's made of and why it matters

This case is EVA (ethylene-vinyl acetate) foam, a closed-cell elastomer commonly used in protective gear and phone cases. EVA is chemically stable at room temperature and does not leach into skin or food. The material is non-toxic when intact and does not off-gas formaldehyde or other volatile organics in normal conditions. No chemical additives are documented for this specific product model.

The brand's record and disclosure

Skullcandy is primarily an audio equipment manufacturer; Geekria is a third-party accessories brand with no public safety certifications or regulatory violations on record. Neither brand discloses material sourcing, chemical testing, or PFAS mitigation. No product recalls, heavy metal contamination reports, or formaldehyde complaints have been published for Geekria earbud cases.

How it compares in its category

Hard plastic or silicone cases often carry higher risk profiles (BPA, phthalates in plastics; silicone degradation). EVA foam is a safer-by-design alternative for protective cases. Most budget earbud cases lack safety certifications, so this product is typical in its transparency gap, not unusual.

If you buy it

Keep the case away from direct heat sources, as EVA can soften above 70C (158F), though it will not release harmful fumes. Wipe periodically with a damp cloth to prevent dust accumulation in the pocket seams. Replace if the foam becomes compressed or develops cracks, as structural integrity will decline. Store in a cool, dry location to extend foam life.

Beyond PFAS: other things we checked

Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”

None known

Heavy metals in colorants or surface coatings

EVA foam is dyed during manufacturing, but no lead, cadmium, or antimony contamination has been reported for Geekria products. Testing data is unavailable.

None known

Volatile organic compound off-gassing

EVA does not off-gas formaldehyde or typical VOCs. Industrial-grade EVA may contain trace residual monomers, but published studies show negligible emission in finished cases at room temperature.

Possible

Microplastics or foam degradation fragments

Prolonged mechanical stress (compression, bending) can cause EVA foam to shed small particles. Risk is low for a protective case used normally, but high-friction or heat exposure may accelerate breakdown.

Possible

Bacterial or mold growth in case cavity

Closed foam cases trap moisture if stored damp. Bacteria and mold can colonize the interior over weeks. Risk is minimized by air-drying the case and earbuds before storage.

None known

Skin irritation from dyes or additives

No allergic reactions or contact dermatitis reports exist for Geekria cases. EVA is hypoallergenic, though individuals with latex sensitivity rarely cross-react.

What we don’t know

This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.

No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.

The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.

Formulations and coatings change between production runs. Always check the current label before buying.

More waterproof earbuds & cases grades

How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.