Remind · Synthetic Athletic Insoles
Remind Insoles Destin Impact Dalton Dern Gnar Foot 5.5mm Low-All Arch Insoles - Multicolor / 7-7.5
Lower concern insole; no PFAS-typical use case identified.
Remind insoles are foam/rubber-based with no waterproofing or nonstick coatings typical of PFAS use. Brand silent on PFAS but category poses minimal risk.
Still want this one anyway? Check the price on Amazon. We’d swap it.
Material
Foam, rubber, textile blend
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
Category baseline
clothing is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
The full breakdown
What it's made of and why it matters
Remind Destin insoles are constructed from foam, rubber, and textile blends, common, well-characterized materials in footwear. The 5.5mm thickness indicates moderate cushioning density. Foam and rubber do not typically leach hazardous compounds into skin contact under normal wear conditions, and textiles in insoles face minimal water or heat exposure that would trigger chemical migration. This material combination is standard across the insole category and carries no known acute toxicity profile.
The brand's record and disclosure
Remind is a skateboard and action-sports brand without documented chemical disclosure statements or third-party certifications (e.g., Oeko-Tex, bluesign). The brand has not published material safety data or responded publicly to PFAS or formaldehyde questions. No product recalls or safety controversies are on record for Remind insoles. The lack of transparency is typical for smaller action-sports brands but reflects no affirmative safety concern.
How it compares in its category
Foam-rubber insoles are the mainstream category standard and carry lower chemical risk than gel or memory-foam variants (which may contain phthalates or other plasticizers). Remind's product sits in the middle of the market for durability and performance; it is not marketed as medical-grade or with special antimicrobial coatings, which is a safety advantage (fewer chemical additives). Textile-backed insoles like this avoid direct skin contact with rubber, reducing any theoretical leaching pathway.
If you buy it
Store insoles in a dry environment to prevent mold growth and bacterial colonization in the foam. Replace insoles every 6-12 months depending on activity level, as foam compression degrades cushioning and may harbor moisture. Do not expose to heat sources (e.g., direct sunlight in closed cars, dishwashers, or dryers) as foam may degrade or off-gas. Hand-wash with mild soap and air-dry to extend life and prevent material breakdown.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Formaldehyde resins in textile backing
No formaldehyde-based finish or antimicrobial treatment is disclosed for Remind Destin insoles. Textile backing in foam insoles typically uses minimal resin; none reported for this product.
Azo dyes in multicolor textile
Multicolor textile components may use azo dyes, which are regulated but permitted in footwear textiles. No specific dye content or restricted-substance testing is published by Remind; risk is minimal given brief skin contact and no sweat-soak use case.
Foam degradation and off-gassing
Foam insoles may release trace volatile organic compounds (VOCs) during storage or under heat, particularly in the first weeks. This is not acutely harmful but may cause mild odor; ventilation mitigates the effect.
Rubber leachables (accelerators, sulfur compounds)
Rubber in insoles typically contains curing agents and accelerators; direct skin contact is minimal because insoles sit inside socks and shoes. No leaching pathway is established for this product under normal wear.
Microorganism growth in moist foam
Foam traps moisture if not dried quickly after wear or in humid climates. Regular replacement and proper drying prevent bacterial or fungal overgrowth; this is a hygiene issue, not a chemical toxicity issue.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
More synthetic athletic insoles grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.