Pyrex · Cookware
Pyrex Ceramic Fry Pan 10-in
Lower PFAS concern. Ceramic coating avoids traditional Teflon-family coating.
Pyrex ceramic cookware uses ceramic rather than Teflon-type coating/PFOA coatings, presenting lower PFAS risk. No PFAS disclosure from brand, but material composition suggests reduced exposure.
Shop Pyrex on Amazon →Material
ceramic non-stick coating
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Category baseline
cookware is a category where PFAS exposure is more common.
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
The full breakdown
What it's made of and why it matters
Pyrex Ceramic Fry Pan uses a ceramic-based non-stick coating applied over a steel or aluminum base rather than Teflon-type coating (Teflon). Ceramic coatings are inorganic and do not off-gas fluorochemicals at normal cooking temperatures. The base material determines whether aluminum or steel leaching is a concern; Pyrex typically uses hard-anodized aluminum or stainless steel for this line, both of which are generally resistant to leaching under normal acidic conditions.
The brand's record and disclosure
Pyrex is owned by Instant Brands and has no publicly documented recalls or safety warnings specific to lead, cadmium, or hazardous coatings for this ceramic fry pan model as of available records. The brand does not publish detailed material certifications or toxicology disclosures on its website, which is typical for the cookware industry but limits independent verification. Pyrex has faced historical scrutiny over borosilicate glass products but has not faced documented issues with this ceramic cookware line.
How it compares in its category
Ceramic non-stick cookware sits in the middle tier for safety: it avoids legacy PFOA/Teflon-type coating concerns inherent to Teflon pans but lacks the durability and heat tolerance of cast iron or stainless steel. Most competing ceramic cookware (T-fal, GreenPan, Our Place) shows similar safety profiles with no material advantage. Pyrex's ceramic line is less heavily marketed on chemical safety than competitors like GreenPan, which may reflect less proactive transparency rather than a safety gap.
If you buy it
Use on medium heat or lower; ceramic coatings degrade faster than Teflon-type coating under high heat and can flake if scratched, which requires replacement to avoid ingestion of coating fragments. Hand wash only; dishwasher use accelerates coating breakdown. Avoid metal utensils and scouring pads. Do not preheat empty for extended periods, as ceramic coatings can deteriorate under sustained dry heat above 400°F. Replace the pan if coating visibly chips or peels, typically within 2-3 years of regular use.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Ceramic coating degradation and flaking
Ceramic non-stick coatings are inherently less durable than Teflon-type coating and shed small particles with normal use and over time. If fragments are ingested, they pose a mechanical choking or blockage risk; no toxicity data exists for ceramic particles themselves, but ingestion is undesirable. Degradation accelerates with dishwasher use and metal contact.
Aluminum base leaching
If this pan uses aluminum rather than stainless steel (common but unconfirmed for this model without opening product), aluminum can leach into acidic foods (tomatoes, vinegar, citrus) at low levels. Long-term dietary aluminum exposure is debated but flagged by some health agencies; leaching increases if the ceramic coating is compromised or worn.
Lead or cadmium in ceramic glaze
No recalls or reported contamination of Pyrex ceramic cookware with lead or cadmium exist on public record. Modern ceramic cookware from major brands typically adheres to FDA limits, but third-party testing of this specific model is not publicly available. Foreign-made ceramic cookware carries higher historical risk, though Pyrex is U.S.-branded.
Teflon-type coating fume inhalation risk
Ceramic coatings do not emit Teflon-type coating or Teflon-type coating-like fumes because they are not Teflon-family coating. This is a material advantage over traditional Teflon pans, eliminating polymer fume fever risk even at very high temperatures.
Coating adhesion and peel risk over time
Ceramic non-stick coatings bond less durably to underlying metal than Teflon-type coating and naturally degrade within 1-3 years of regular cooking. Peeling is a wear mechanism inherent to the technology, not a manufacturing defect. Replacement is the practical endpoint for this product class.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 78% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
Safer alternatives in Cookware
GreenPan
Ceramic Non-stick
⚠Risky category by default
Scanpan
Ceramic Titanium
⚠Risky category by default
GreenPan
Chatham Ceramic Nonstick Frypan Set
⚠Risky category by default
More cookware grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.