PUR · Faucet Water Filters
PUR Faucet Mount Water Filter System PFM400H
Lower PFAS concern, but PUR's silence on PFAS sourcing leaves room for doubt.
The PFM400H uses standard activated carbon and ion-exchange media, which are not inherently PFAS-containing materials. PUR has not publicly disclosed whether these filter cartridges or plastic components are treated with water-repellent or grease-resistant coatings that might contain PFAS.
Shop PUR on Amazon →Material
activated carbon and ion-exchange resin cartridge; plastic housing
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
No PFAS disclosure
No public statement about PFAS in this product.
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
The full breakdown
What it's made of and why it matters
The PFM400H cartridge contains activated carbon and ion-exchange resin, both standard water filtration media with decades of safe use records. The housing is plastic (composition not publicly specified by PUR, but typically polysulfone or polycarbonate in faucet-mount filters). Activated carbon does not leach harmful compounds into water; ion-exchange resin binds ions rather than shedding particles. The main chemical pathway for concern would be incomplete housing specification or resin breakdown, neither of which appears documented for this model.
The brand's record and disclosure
PUR (owned by Pentair) holds NSF/ANSI 42 and 53 certifications, which require testing for lead, pesticides, and chlorine reduction but do not specifically mandate PFAS source documentation. PUR has not publicly disclosed sourcing practices for activated carbon or resin components. The brand has faced no major recalls or leaching incidents for this product line. PUR's silence on PFAS in input water or supply chain sourcing leaves open questions about raw material provenance, though the filter's performance on PFAS is independently rated well.
How it compares in its category
Faucet-mount filters like the PFM400H occupy a middle ground: cheaper and simpler than under-sink systems, more convenient than pitcher filters, but with smaller cartridge capacity and shorter lifespan. Activated carbon filters are the industry standard and share no known safety disadvantages versus competitor models (Brita, ZeroWater). The PFM400H's plastic housing is typical for this form factor; metal-housing alternatives are rare and do not carry documented safety advantages. Replacement cartridge availability is strong due to PUR's market share.
If you buy it
Replace cartridges every 100 gallons or 2-3 months, whichever comes first; expired cartridges lose effectiveness and can harbor bacteria if water flow stagnates. Do not run hot water through the filter housing; plastic components are not rated for sustained temperatures above 38-40 degrees Celsius, and heat can degrade the housing seal. Flush the new cartridge for 5 seconds before first use to clear activated carbon dust. Store in a cool, dry location and inspect the housing for cracks or discoloration monthly, as UV exposure or mineral scaling can compromise the seal over time.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Plastic housing leachables
PUR does not publicly specify housing material composition. Standard polysulfone or polycarbonate housings in faucet-mount filters are not documented to leach BPA, phthalates, or other known endocrine disruptors under normal cold-water use. No recalls or independent testing showing leaching have been published for the PFM400H.
Bacterial biofilm growth in cartridge
Activated carbon can harbor bacteria if cartridges are not replaced on schedule or if water sits stagnant in the housing. This is a maintenance issue, not a manufacturing defect, and applies to all carbon-filter systems. PUR recommends 100-gallon replacement intervals to mitigate this risk.
Activated carbon dust release
New cartridges may shed fine carbon particles into first-flush water. PUR instructs flushing for 5 seconds before use. This is cosmetic and not a health hazard at typical concentrations, but can discolor water or affect taste until flushed.
Ion-exchange resin exhaustion and bypass
If cartridge is not replaced when full (beyond 100 gallons), the resin stops binding ions and water passes untreated. This is not a chemical leaching hazard but a performance failure. NSF 53 certification requires testing for this, and PUR meets the standard; user compliance with replacement schedule is the limiting factor.
Housing seal degradation from mineral buildup
In hard-water areas, mineral deposits can accumulate on the housing seal interface, potentially allowing unfiltered water to bypass the cartridge over months of use. This is a maintenance and design limitation shared across the faucet-mount category, not specific to PUR. Regular visual inspection and cartridge replacement on schedule mitigate this.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
Safer alternatives in Faucet Water Filters
Aquasana
Under Sink Water Filter 2-Stage Filtration Reduces up to 99.99% of Pfas
Activated carbon, ion exchange resin cartridges
Lower-concern filter type, but claim lacks third-party lab proof, verify independently before relying on it.
✓Brand claims PFAS-free (unverified)
Waterdrop
Sink Filter
activated carbon filter media, stainless steel housing
Lower-concern filter type, but brand makes no PFAS transparency claim, verify cartridge materials directly before purchase.
✓Bare metal or glass, no coating at all
Waterdrop
Filtered Water Faucet
stainless steel faucet body; activated carbon/ion-exchange filter cartridge
Lower-concern choice; water filter design avoids high-risk PFAS applications, but brand transparency on materials could be stronger.
✓Bare metal or glass, no coating at all
More faucet water filters grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.