PUR · Water Filters
Honeywell Pur 11 Cup Water Filter Pitcher HWLCR1100C
Lower-concern for typical use; no PFAS disclosure, but carbon filters and plastic pitchers are not common PFAS vectors.
The PUR 11-cup pitcher uses an activated carbon filter cartridge and plastic housing. Carbon filters and plastic water-pitcher bodies are not typical sources of intentional PFAS contamination.
Shop PUR on Amazon →Material
Plastic pitcher housing; activated carbon filter cartridge
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
No PFAS disclosure
No public statement about PFAS in this product.
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
The full breakdown
What it's made of and why it matters
The HWLCR1100C pitcher body is polypropylene (PP) plastic, a food-contact material that is stable and does not leach under normal cold-water storage conditions. The filter cartridge contains activated carbon (granular and block forms) that adsorbs chlorine, odor, and some organic contaminants. Polypropylene does not contain BPA or phthalates by design, and the pitcher is not exposed to heat during use (water sits at ambient temperature), eliminating the mechanism for plastic leaching.
The brand's record and disclosure
PUR is owned by Procter & Gamble and markets heavily on contaminant reduction; the brand does not publish third-party test data or certification letters on the product page. No major recalls or safety controversies are on record for this model. The pitcher is typically marketed with NSF or similar third-party claims, though direct verification on this SKU requires checking the product box or PUR's website directly.
How it compares in its category
Pitcher filters occupy the low-cost, low-barrier entry point in home water treatment. The 11-cup capacity and dual-stage filtration (carbon block) are standard for the mid-market pitcher segment. Compared to refrigerator filters or faucet-mount systems, pitcher filters require more frequent manual replacement and user discipline to prevent stagnation, but they offer portable flexibility and no plumbing installation.
If you buy it
Replace the filter cartridge every 2-3 months or per manufacturer guidance (roughly 40 gallons filtered) to prevent bacterial biofilm buildup inside the cartridge housing. Store the pitcher in a cool, dark location; do not leave filled water sitting for more than a few days without use. Rinse the housing with warm water (not hot) when changing filters. The pitcher itself should last 2-3 years with normal care; cracks or discoloration warrant replacement to avoid leaching or contamination pathways.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Bacterial growth in filter cartridge
Activated carbon filters provide a nutrient-rich surface for biofilm formation if not replaced on schedule or if water sits stagnant for extended periods. Proper filter rotation (every 2-3 months) and regular use largely mitigate this risk.
Plastic leaching from pitcher housing
Polypropylene used in this pitcher is chemically inert at room temperature and does not contain known endocrine disruptors like BPA. No leaching has been reported for this product or material class under normal cold-water storage.
Activated carbon dust or particle shedding
New filter cartridges may release fine carbon particles into the first 1-2 pitcher fills. Running the first pitcher of water through the kitchen sink drain (discarding it) before drinking is a standard precaution and is often recommended in product instructions.
Housing cracks or material degradation over time
Polypropylene can become brittle after 2-3 years of exposure to light and temperature cycling, particularly near the seams and valve housing. Hairline cracks are not immediately dangerous but increase contamination risk and warrant pitcher replacement.
Unverified contaminant removal claims
PUR's marketing claims (e.g., lead, cyst, or chlorine reduction) typically rely on NSF certification, but this specific model's certifications are not always transparent on retail listings. Verification against NSF standards or PUR's official product documentation is recommended if specific contaminants are a concern.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
Safer alternatives in Water Filters
Generic
Reverse Osmosis System (generic)
✓Lab test found no PFAS
Berkey
Gravity Filter
✓Brand claims PFAS-free (unverified)
More water filters grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.