85/ 100
B
OverallC71/100
OnCore Mix used golf balls - Foundgolfballs.com 5A/4A Mix (10 Dozen)

OnCore · Golf Equipment & Balls

OnCore Mix used golf balls - Foundgolfballs.com 5A/4A Mix (10 Dozen)

B · Low PFAS

Used golf balls, lower PFAS concern; no known surface treatments detected.

Verdict: BuyUsed golf balls pose minimal chemical hazard; urethane construction stable at normal use temperatures; no brand safety record issues identified.

OnCore Mix golf balls are primarily urethane and synthetic rubber with no disclosed water-repellent or stain-resistant coatings. Brand makes no PFAS claims; used condition may reduce any residual risk.

Check price on Amazon →

We flunk more products than we pass. This one earned its grade. How we grade

Material

Urethane/synthetic rubber core and cover

Brand disclosure

Brand is silent on PFAS

Lab data

No public lab test

Why this grade

Safe base material

Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).

Helps the grade

Category baseline

other is a category where PFAS exposure is more common.

Hurts the grade

No PFAS disclosure

No public statement about PFAS in this product.

Hurts the grade

The full breakdown

What it's made of and why it matters

OnCore Mix balls use a urethane cover over a synthetic rubber core, a standard construction in modern golf balls. Urethane is chemically inert under normal conditions (room temperature, typical outdoor use) and does not leach into skin or sweat during handling or play. The 5A/4A grade designation refers to cosmetic quality (minor scuffs, discoloration) rather than structural integrity; used balls of this grade retain full material stability.

The brand's record and disclosure

OnCore is a smaller golf equipment manufacturer without documented public safety disclosures or recalls related to ball composition. No established safety controversies or certifications specific to the brand are on record. The reseller (Foundgolfballs.com) is a secondary market vendor; accountability rests with OnCore for material sourcing and manufacturing standards.

How it compares in its category

Used golf balls carry inherently lower chemical risk than new balls because any volatile organic compounds (VOCs) from manufacturing cure processes have already off-gassed over time and use. This product occupies the same material-safety baseline as all synthetic-core, urethane-cover balls; no formulation specificity distinguishes OnCore as higher or lower risk within its class.

If you buy it

Store balls at room temperature in a dry location; no special handling is required. Wash with mild soap and water if desired; urethane is durable and does not degrade from water or sunlight at normal rates. Do not deliberately incinerate or expose to extreme heat (above 130 degrees Fahrenheit sustained) as a precaution, though normal play and storage present no risk. Inspect for large cracks or separation before use, though cosmetic wear does not affect safety.

Beyond PFAS: other things we checked

Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”

None known

Volatile organic compound (VOC) off-gassing from urethane manufacturing

Used balls have completed the primary cure and off-gassing phase that occurs in the factory and shortly after production. No evidence of VOC release from aged urethane golf balls in normal storage or use conditions.

None known

Heavy metal leaching from core/cover materials

Urethane and synthetic rubber formulations used in golf balls are not known to contain lead, cadmium, or other heavy metals at levels of concern. No recalls or safety alerts exist for OnCore or comparable brands on this hazard.

None known

Skin contact irritation or sensitization

Urethane and synthetic rubber are non-irritant materials under normal skin contact. Handling used golf balls during play or practice poses no documented dermal hazard.

Possible

Microplastic or particle shedding

Used golf balls do shed fine particulates from surface scuffs and wear over time; this is cosmetic degradation rather than a chemical hazard. Inhalation risk is negligible during outdoor play; concern would only apply in long-term indoor industrial handling scenarios not relevant to consumer use.

Reported

Degradation of cover integrity and water ingress

5A/4A used balls may have minor surface damage that, if deep enough, can allow water penetration into the core over extended play. This affects performance and durability, not chemical safety; water ingress does not liberate toxic compounds from urethane or rubber.

What we don’t know

This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.

No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.

The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.

Formulations and coatings change between production runs. Always check the current label before buying.

More golf equipment & balls grades

How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.