85/ 100
B
OverallC77/100
Okuma Ceymar A Spinning Reel

Okuma · Fishing Line & Tackle

Okuma Ceymar A Spinning Reel

B · Low PFAS

Fishing reel with standard metal/plastic construction, lower PFAS concern.

Verdict: BuyFishing reel with inert metal/stainless construction and no established chemical hazards; standard recreational product with minimal consumer safety concern.

Okuma Ceymar A is a metal spinning reel with no water-repellent or nonstick coatings typical of PFAS risk. No brand disclosure available, but material composition suggests lower concern.

Shop Okuma on Amazon →

Material

Aluminum spool, stainless steel ball bearings, machined metal components

Brand disclosure

Brand is silent on PFAS

Lab data

No public lab test

Why this grade

Safe base material

Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).

Helps the grade

Category baseline

other is a category where PFAS exposure is more common.

Hurts the grade

No PFAS disclosure

No public statement about PFAS in this product.

Hurts the grade

The full breakdown

What it's made of and why it matters

The Okuma Ceymar A uses aluminum spools, stainless steel ball bearings, and machined metal components typical of mid-range spinning reels. These materials are chemically stable in freshwater and saltwater use and do not leach harmful substances into food or skin contact. The reel contains minimal polymer parts (seals, grease); aluminum and stainless steel do not release heavy metals or organic toxins under normal fishing conditions. No coating degradation risk exists because fishing reels are not heated or used for food preparation.

The brand's record and disclosure

Okuma is a Japanese fishing equipment manufacturer with no public record of chemical safety disclosures, certifications (e.g., REACH, RoHS), or major product recalls related to hazardous substances. The brand maintains silence on PFAS use in manufacturing or waterproofing treatments, which is consistent with the fishing industry norm of minimal transparency on fluorochemical inputs. No established health controversies or regulatory warnings are documented for Okuma consumer products. Standard industry practice suggests reels may contain minor PFAS in gasket coatings or water-resistant grease, but this is not confirmed.

How it compares in its category

Spinning reels as a product category carry minimal chemical hazard compared to nonstick cookware, food storage plastics, or textiles. Metal-body reels like the Ceymar A are chemically inert and do not off-gas or leach into consumables. Competitors using identical aluminum and stainless steel construction (Shimano, Abu Garcia, Penn) face identical material profiles; no reel brand discloses PFAS or chemical testing. The Ceymar A is typical for its price point and carries no unusual safety disadvantage.

If you buy it

Rinse the reel with fresh water after saltwater use to prevent corrosion and salt accumulation in bearing seals. Store in a dry location to avoid mold growth on gaskets and internal grease. Check for visible rust or pitting on the aluminum spool annually; these indicate seal failure and potential water ingress into bearings, but do not create chemical hazards. Replacement grease sold aftermarket may vary in composition; use manufacturer-approved products to maintain water resistance. The reel poses no skin, inhalation, or food-contact hazard.

Beyond PFAS: other things we checked

Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”

Possible

Metal corrosion and salt accumulation

Aluminum spools can pit or corrode if exposed to saltwater without rinsing, though this is a durability issue, not a chemical safety hazard. Corrosion byproducts remain on the reel surface and do not migrate into skin or consumables.

None known

Grease and lubricant composition

Okuma does not disclose the chemical formula of factory grease in the Ceymar A. Standard fishing reel grease is petroleum-based or synthetic hydrocarbon; no reports of toxicity from contact with reel grease under normal use conditions exist in public records.

None known

Bearing cage material (plastic or brass)

Ball bearing cages in the Ceymar A are typically brass or plastic composite. No leachable components are known for these materials under dry or wet ambient conditions typical of fishing use.

Possible

Gasket and seal materials

Elastomer gaskets and seals may contain minor PFAS or other water-repellent additives, which is standard practice in marine equipment. No direct skin or ingestion route exists unless a seal is removed and chewed; normal use poses no hazard.

None known

Painted or coated surfaces

The Ceymar A exterior is typically anodized aluminum or bare metal, not painted. Anodizing is an electrochemical process that creates an inert oxide layer; no lead, cadmium, or organic coatings are known to be present.

What we don’t know

This grade is a model-based estimate from public materials, coatings, and brand disclosure at 75% confidence. It is not a lab result.

No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.

The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.

Formulations and coatings change between production runs. Always check the current label before buying.

More fishing line & tackle grades

How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.