Murphy Oil Soap · Fabric Treatment Sprays
Murphy Oil Soap Multi-use Spray Ready-To-Use - 22 fl oz (0.7 quart) - Fresh Orange Scent - Orange Bottle - 9 / Carton
Lower PFAS concern; traditional soap product, no high-risk materials identified.
Murphy Oil Soap is a plant-oil-based multi-purpose cleaner with no known surfactant fluorination or water-resistant treatments. No public PFAS disclosures or claims found; standard soap formulations carry lower inherent risk than specialty coatings or stain treatments.
Shop Murphy Oil Soap on Amazon →Material
Aqueous soap concentrate, plant-derived oils
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
Category baseline
other is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
The full breakdown
What it's made of and why it matters
Murphy Oil Soap is an aqueous concentrate based on plant-derived oils (primarily mineral oil and saponified vegetable oils) formulated as a multipurpose cleaner. The ready-to-use spray formulation is pre-diluted water-based soap, not a chemical solvent product. Plant-oil soaps are among the lowest-concern cleaning agents because they biodegrade readily and lack synthetic surfactants, solvents, or harsh alkalis that pose inhalation or skin risks.
The brand's record and disclosure
Colgate-Palmolive (Murphy's parent) does not publish detailed ingredient transparency for this product beyond the label, and makes no specific PFAS commitments for this line. The brand has faced scrutiny on PFAS in other product categories but is largely silent on Murphy Oil Soap specifically. No recalls or safety controversies are on record for this cleaner. The product carries no third-party certifications (e.g., EcoLogo, EPA Safer Choice).
How it compares in its category
Murphy Oil Soap is among the safest multipurpose cleaners available; it predates synthetic surfactant cleaners (circa 1941) and relies on a simpler chemistry than most modern alternatives. Compared to ammonia-based or chlorine-based cleaners, it avoids volatile organic compounds and toxic inhalation hazards. It is broadly equivalent in safety profile to other plant-soap products (e.g., Dr. Bronner's, Seventh Generation Free & Clear).
If you buy it
Use in well-ventilated spaces and avoid inhaling spray mist, though inhalation risk is very low. The product is safe for skin contact but may irritate eyes; rinse promptly if exposed. Store away from extreme heat and sunlight to preserve the oil phase. Do not mix with bleach or ammonia-based products, as this can create irritant fumes. Use per label dilution for floors and surfaces; undiluted spray on delicate finishes may leave residue.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Inhalation of spray mist
Ready-to-use spray format poses low but non-zero risk of inhaling fine droplets; plant-oil soaps are non-toxic if inhaled in small amounts, but chronic spray exposure in poorly ventilated spaces is not recommended.
Eye irritation from direct spray contact
Soap solutions are mild irritants to eyes; accidental spray contact requires immediate rinsing but poses no systemic toxicity risk.
Skin sensitization from fragrance components
The fresh orange scent is presumed to contain limonene (citrus-derived terpene) and synthetic fragrance notes; no established dermatologic concerns are on record for Murphy Oil Soap, though individuals with fragrance sensitivity may react.
Residue buildup on sealed surfaces
Oil-based soaps can leave a waxy film on some floors and finished wood if over-diluted or over-applied; this is cosmetic rather than a health hazard but affects product performance.
Bacterial or mold growth in spray bottle if not maintained
Aqueous spray bottles stored at room temperature for extended periods can develop microbial contamination; this is a product-storage issue, not inherent to the soap itself. Regular bottle cleaning and replacement prevent this risk.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 82% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
More fabric treatment sprays grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.