Macy's · Stain-Resistant Blazers & Suits
DKNY Women's Single-Button-Front Long-Sleeve Blazer
Lower concern. Standard blazer fabric unlikely to contain PFAS.
A conventional wool-blend or polyester blazer with no water-resistant finish disclosed. No PFAS treatment signals detected; standard apparel poses lower PFAS risk than treated technical wear.
Still want this one anyway? Check the price on Amazon. We’d swap it.
Material
wool blend or polyester, standard weave
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
Category baseline
clothing is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
The full breakdown
What it's made of and why it matters
DKNY blazers in this category are typically wool blends (often 60-80% wool, 20-40% polyester) or 100% polyester. Wool is a natural fiber with minimal chemical leaching risk; polyester is a stable synthetic polymer that does not off-gas formaldehyde under normal wearing conditions. The single-button front and standard weave mean minimal finishing chemicals are required beyond basic dyes and pressing agents, which are applied in small amounts to most garments at this price point.
The brand's record and disclosure
Macy's does not publish detailed chemical disclosure statements for DKNY branded items, and DKNY has not adopted ZDHC Gateway or similar supply-chain transparency tools. No recalls or safety controversies specific to DKNY blazers are on public record. Standard Macy's merchandise is subject to US textile fiber labeling and flammability requirements, but formaldehyde-resin content is not disclosed to consumers.
How it compares in its category
This blazer falls into the mainstream contemporary apparel segment; it offers no special certifications (e.g., GOTS, OEKO-TEX) that would signal reduced chemical exposure. Alternatives from brands like Uniqlo or Everlane may disclose more about dye suppliers or chemical management. However, a standard wool-blend or polyester blazer from any mass-market retailer carries similar baseline chemical risks and is considered safe under normal wearing conditions by public health standards.
If you buy it
Wash in cold water with a mild detergent before first wear to reduce loose dyes and residual finishing agents; this is standard practice for all new clothing. Dry clean if the care label specifies it, or hand-wash if wool content is high. Blazers are worn over other layers and rarely contact skin directly for extended periods, minimizing exposure to any residual chemicals. Replace or retire if visible signs of wear, staining, or odor develop; otherwise, normal lifespan is 3-5 years with standard care.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Azo dyes (synthetic colorants)
Standard blazers may use azo dyes in navy, black, or patterned finishes. These are permitted in the US but can release aromatic amines under certain conditions (heavy sweating, industrial processing). Risk to the wearer is very low under normal use.
Formaldehyde-releasing resins (wrinkle-resistance, sizing)
Polyester blazers often undergo resin finishing for crease retention and feel. No formaldehyde content is disclosed for this product. Off-gassing is minimal on completed garments, and washing removes most residual agents, but sensitive individuals may notice odor on opening.
Antimony (polyester catalyst residue)
Antimony oxide is a standard catalyst in polyester production and can remain at trace levels in finished fabric (typically <100 ppm). No recalls or health advisories exist for consumer polyester apparel; dermal absorption during wearing is not established as a concern.
Flame retardants (intentional treatment)
This blazer is not marketed as flame-resistant and likely contains no added flame retardant chemicals beyond any required by US textile flammability standards (16 CFR 1610), which apply to garments but impose very low thresholds for blazers.
Volatile organic compounds (VOC) off-gassing during storage
New polyester garments may emit traces of VOCs from dyes, finishes, and packaging. This is typically undetectable after one wash and first airing. Sensitivity varies by individual; airing the blazer before wearing can reduce this risk.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
More stain-resistant blazers & suits grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.