Macy's · Stain-Resistant Blazers & Suits
Calvin Klein One-Button Suit Jacket
Likely lower concern; standard suit jacket without water or stain treatment.
Calvin Klein suit jackets typically use wool blends or polyester without water-repellent coating finishes. No PFAS claims or third-party certifications found; standard business suiting carries minimal PFAS risk unless treated for water or stain resistance.
Still want this one anyway? Check the price on Amazon. We’d swap it.
Material
wool blend or polyester, standard tailoring
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
Category baseline
clothing is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
The full breakdown
What it's made of and why it matters
Calvin Klein One-Button Suit Jackets are typically constructed from wool blends (often 55-80% wool with polyester) or full polyester, depending on the specific line sold at Macy's. Wool naturally resists wrinkles and flame spread, reducing reliance on chemical finishes. Polyester blends lower cost and care burden but introduce synthetic fiber shedding and potential chemical residue from dyeing. The lining is usually acetate or polyester, which poses minimal hazard if intact.
The brand's record and disclosure
Calvin Klein (owned by PVH Corp) has published some sustainability disclosures but remains largely silent on specific chemical use in finished garments like suit jackets. The brand does not widely advertise third-party certifications (such as OEKO-TEX or bluesign) for standard suiting. No significant product recalls or chemical contamination incidents are on record for Calvin Klein outerwear. Macy's itself requires basic compliance with US textile labeling rules but does not independently test vendor products.
How it compares in its category
Mass-market suit jackets from Calvin Klein sit in the mid-safety range for tailored menswear: better than ultra-budget synthetic suits (which may use heavy dyes and finishes) but below luxury or certified-sustainable alternatives that disclose fiber sourcing and dye houses. Wool-blend versions carry slightly lower chemical load than 100% polyester competitors. The one-button cut and standard construction introduce no additional hazards beyond typical jackets.
If you buy it
Wash or dry-clean according to the care label; wool blends typically require dry-cleaning, which removes surface residue. Avoid prolonged heat exposure during ironing (use steam or low heat for polyester content). Inspect the jacket after a few wears for loose dyes or seam leakage, which is rare but indicates poor finishing. Store in a breathable garment bag away from direct sunlight to prevent accelerated degradation of synthetic fibers.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Azo dyes and synthetic dye residue
Polyester or polyester-blend suit jackets typically use azo dyes in their production. Residual dye transfer onto skin or undergarments is uncommon after manufacturing but remains possible if garment is not rinsed adequately. A single wash or dry-clean cycle removes most transferable dye.
Formaldehyde-based finishing resins
Mass-market tailored jackets often receive formaldehyde-resin treatments to set creases and stabilize seams, though wool naturally requires less chemical finishing than cotton or linen. Levels in finished garments are typically well below regulatory limits in the US and EU, and off-gassing diminishes with airing and wear.
Antimony in polyester fiber
Antimony trioxide is sometimes used as a catalyst in polyester production but does not migrate from the finished fiber into skin or sweat under normal wear. No documented cases of antimony leaching from suit jackets have been reported.
Microfiber shedding from synthetic blends
Polyester-blend jackets shed microscopic fibers during wear and washing, contributing to microplastic environmental burden. While shedding itself poses no direct hazard to the wearer, minimizing wash frequency and using a lint filter reduces this impact.
Lining material degradation
Acetate or polyester linings in suit jackets are stable under normal wear and dry-cleaning; no leaching of plasticizers or other additives into sweat has been established for this product class. Degradation occurs only after years of heavy use.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 68% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
More stain-resistant blazers & suits grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.