85/ 100
B
OverallC77/100
Bey Berk 24-Section Jewelry Case

Macy's · Jewelry Cases & Jewelry Organizers

Bey Berk 24-Section Jewelry Case

B · Low PFAS

Jewelry storage. No clear PFAS risk identified in standard materials.

Verdict: BuyVelvet-lined jewelry case with no established chemical hazards; low-risk storage product suitable for non-food contact use.

Bey Berk jewelry cases typically use velvet, polyester lining, and wood construction. No known waterproofing or stain treatments typical for this product category. Lower concern product.

Shop Macy's on Amazon →

Material

velvet and polyester lining, wood/MDF box

Brand disclosure

Brand is silent on PFAS

Lab data

No public lab test

Why this grade

Safe base material

Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).

Helps the grade

Category baseline

other is a category where PFAS exposure is more common.

Hurts the grade

No PFAS disclosure

No public statement about PFAS in this product.

Hurts the grade

The full breakdown

What it's made of and why it matters

The Bey Berk case uses a wood or MDF box frame with velvet and polyester fabric lining. Velvet is typically a natural fiber (cotton or silk) or synthetic (polyester) pile bonded to a backing; polyester lining adds durability but introduces synthetic polymer exposure. Neither material requires direct skin contact at high temperatures, which limits leaching risk. MDF (medium-density fiberboard) can off-gas formaldehyde, but ventilated storage applications pose minimal inhalation concern compared to closed furniture.

The brand's record and disclosure

Macy's does not publicly disclose detailed material certifications or chemical testing results for this accessory line. No recalls or safety controversies are on record for the Bey Berk jewelry case specifically. The brand's silence on PFAS and hazardous substances is typical for retail jewelry storage products, which fall outside cosmetics and cookware regulatory scrutiny. Macy's general product safety compliance is standard for department stores but not distinguished by proactive transparency.

How it compares in its category

Jewelry storage cases are low-chemical-risk products because they do not contact food, skin for extended periods, or consume liquids. This velvet-lined case is comparable to most mid-range jewelry organizers; fabric-lined boxes are safer than plastic-only alternatives (which carry microplastic shedding risk if abraded). Wood-based cases may off-gas more than all-plastic designs, but jewelry storage ventilation typically keeps exposure negligible.

If you buy it

Store the case in a ventilated area for the first week to allow any initial formaldehyde off-gassing from the MDF to disperse. Do not seal it in a closed plastic bag long-term. Avoid direct sunlight on the velvet lining to prevent dye fading and potential photodegradation of the synthetic backing. Spot-clean the velvet with a soft brush or lint roller if soiled; do not machine wash or use solvents that may degrade the polyester or adhesive.

Beyond PFAS: other things we checked

Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”

Possible

Formaldehyde off-gassing from MDF

MDF box components may emit trace formaldehyde, especially when new. Jewelry storage is ventilated and non-food-contact, so exposure is minimal and typically below concern thresholds in typical home storage use.

None known

Azo dyes in velvet or polyester lining

No specific test results or recalls document toxic azo dyes in Bey Berk products. Velvet dyeing can involve azo compounds in lower-cost fabrics, but direct skin contact from this case is limited to brief handling of jewelry.

None known

Polyester microplastic shedding

Polyester backing may shed microfibers if abraded or laundered, but this case is not washed and handles only solid jewelry; shedding risk is negligible under normal use.

Possible

Adhesive or glue volatiles from wood joints

MDF assembly typically uses formaldehyde-based adhesives; off-gassing dissipates quickly in ventilated storage. No specific adhesive chemistry is disclosed by Macy's for this product line.

What we don’t know

This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.

No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.

The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.

Formulations and coatings change between production runs. Always check the current label before buying.

More jewelry cases & jewelry organizers grades

How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.