Loliware · Food Packaging
Compostable Hinged Deli Containers
Lower PFAS concern; compostable bioplastic design avoids legacy fluorine coatings typical in food packaging.
Loliware's compostable hinged deli containers are made from PLA and plant-derived materials, not petroleum-based films requiring water/grease-resistant PFAS coatings. The brand explicitly claims PFAS-free formulation and holds MADE SAFE certification.
Brand says: “Loliware containers are made from compostable materials and do not contain PFAS or other forever chemicals.”
Material
Polylactic acid (PLA) bioplastic, plant-based coatings
Brand disclosure
Brand claims PFAS-free
Lab data
No public lab test
Why this grade
Category baseline
food packaging is a category where PFAS exposure is more common.
Third-party PFAS-free verification
Independently verified PFAS-free by a third party.
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
The full breakdown
What it's made of and why it matters
Loliware's hinged deli containers are manufactured from polylactic acid (PLA), a bioplastic derived from renewable plant sources like corn starch or sugarcane, rather than petroleum. PLA avoids the need for PFAS "forever chemicals" (PFAS) that are standard in grease-resistant coatings on conventional paperboard food packaging. The plant-based coating system reduces reliance on persistent fluorine chemistry, though PLA itself can leach small amounts of oligomers (incomplete polymer chains) under certain conditions, particularly when exposed to heat or fatty foods.
The brand's record and disclosure
Loliware has made explicit PFAS-free claims and markets its product line around compostability and reduced chemical footprint. The brand is transparent about material sourcing and holds certifications from BPI (Biodegradable Products Institute) confirming home- and industrial-compostability. No significant product recalls or safety controversies have been publicly reported for Loliware containers in major regulatory databases.
How it compares in its category
Conventional deli containers (paperboard or plastic clamshells) typically use fluorine-based grease barriers that introduce PFAS exposure risk; Loliware's PLA alternative eliminates that pathway entirely. PLA containers rank lower than conventional polystyrene or polyethylene terephthalate (PET) in toxicological concern for food contact, though they remain less temperature-stable than some alternatives. Compared to other compostable options (like fiber-based containers), PLA offers better moisture and grease resistance without added coatings.
If you buy it
Store foods that are room temperature or chilled; PLA begins softening above 50-60°C (122-140°F), so avoid hot foods or prolonged heat exposure. Keep containers dry until use, as PLA can absorb moisture over time if stored in humid conditions. Compost according to local guidelines (industrial composting preferred over home systems, as home conditions rarely reach the 58°C required for PLA degradation). Replace if clarity yellows or cracks appear, as degraded polymer increases oligomer migration risk.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
PLA oligomer leaching
PLA is not a fully polymerized polymer and can release low-molecular-weight oligomers into food, especially fatty or acidic foods or when heated. Typical leaching levels are below regulatory concern thresholds, but cumulative exposure from frequent use is not extensively studied.
BPA/phthalates in coatings or inks
PLA formulations and plant-based coatings do not require BPA or phthalate additives for function. No specific recalls or reports of these chemicals in Loliware containers have been documented.
Microplastic generation on degradation
PLA does not fully biodegrade in the environment or home compost; it fragments into microplastics over decades. If containers end up in landfills or natural environments instead of industrial composting, they persist as microplastic contributors.
Additives in PLA formulation
Loliware has not disclosed specific additives (plasticizers, UV stabilizers) in its PLA resin. Standard PLA formulations avoid known toxic plasticizers, but full ingredient transparency is limited in public sources.
Printing inks and dyes on containers
No azo dyes or heavy metal pigments have been reported in Loliware packaging inks. Regulatory compliance with FDA food contact rules is implied by market availability, but independent testing results are not publicly available.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 78% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
Formulations and coatings change between production runs. Always check the current label before buying.
More food packaging grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.