95/ 100
A
OverallB83/100
Lg Appliances Adq74813401 Water Filter - Filters Screens & Driers

LG · Countertop Filters

Lg Appliances Adq74813401 Water Filter - Filters Screens & Driers

A · Very low PFAS

Lower concern water filter, but LG provides no PFAS transparency.

Verdict: BuyActivated carbon filter with no reported leaching issues; routine replacement and maintenance eliminate primary risks.

LG refrigerator replacement filters typically use activated carbon and polypropylene, materials with lower inherent PFAS risk. LG does not publicly disclose PFAS status or hold relevant certifications.

Shop LG on Amazon →

Material

Activated carbon and polypropylene filter media

Brand disclosure

Brand is silent on PFAS

Lab data

No public lab test

Why this grade

Safe base material

Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).

Helps the grade

No PFAS disclosure

No public statement about PFAS in this product.

Hurts the grade

The full breakdown

What it's made of and why it matters

This filter uses activated carbon as the primary media, supported by polypropylene (PP) housing and filter substrate. Activated carbon is inert and does not leach into water under normal use conditions. Polypropylene is a food-contact safe plastic at room temperature and does not release BPA or phthalates in cold-water filtration.

The brand's record and disclosure

LG does not publicly disclose PFAS removal claims or third-party testing certifications for this specific model. The company maintains no visible transparency page for water filter safety specifications. No recalls or contamination incidents have been publicly documented for this filter line.

How it compares in its category

Activated carbon filters are a mainstream, low-risk category standard. This LG model lacks NSF certification or independent verification, which is common for OEM replacement filters but places it behind certified aftermarket alternatives like Aqua-Pure or EveryDrop. The absence of transparency is a relative weakness, not a safety failure.

If you buy it

Replace cartridges every 6 months or per manufacturer guidance to prevent bacterial biofilm growth inside the housing. Do not expose the filter housing to heat or direct sunlight. Allow cold water only to pass through (no hot-water bypass). Clean the housing threads and seals quarterly to avoid mold at connection points.

Beyond PFAS: other things we checked

Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”

Possible

Bacterial growth if unmaintained

Activated carbon filters can harbor bacterial biofilm if cartridges are not replaced on schedule or housing is left stagnant. Regular replacement (every 6 months) and flushing mitigate this risk substantially.

None known

Polypropylene housing leachables

Polypropylene is chemically inert in cold water and poses no documented leaching risk at room temperature. No BPA, phthalates, or other endocrine disruptors are released under normal filtration conditions.

Possible

Activated carbon dust or particles

New carbon filters may release fine carbon particles in the first flush cycle. Running water through the filter for 2-3 minutes before use eliminates this; a single-use flushing is standard practice.

Possible

Seal degradation over time

Rubber or silicone gaskets in the cartridge connection can degrade after 12-18 months or repeated thermal cycles if the filter is left in warm environments. Inspect seals before installation and replace cartridges on schedule.

What we don’t know

This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.

No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.

The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.

Formulations and coatings change between production runs. Always check the current label before buying.

Safer alternatives in Countertop Filters

ZeroWater 40-Cup Glass Water Filter Dispenser

ZeroWater

40-Cup Glass Water Filter Dispenser

borosilicate glass, plastic pitcher housing, ion-exchange resin cartridge

A
B
PFASAll
A · Very low PFAS3 flags

Lower concern on PFAS, but brand silence on cartridge composition is a missed transparency opportunity.

Bare metal or glass, no coating at all

Culligan ZeroWater Technology 22-Cup Ready Water Filtration Dispenser

ZeroWater

Culligan ZeroWater Technology 22-Cup Ready Water Filtration Dispenser

Plastic housing, activated carbon + ion-exchange resin filter media

A
C
PFASAll
A · Very low PFAS4 flags

Lower concern, but verify filter cartridge specs before relying on PFAS claims.

Brand claims PFAS-free (unverified)

LARQ PureVis Pitcher

LARQ

PureVis Pitcher

Borosilicate glass pitcher, activated carbon filter cartridge

A
B
PFASAll
A · Very low PFAS4 flags

Lower PFAS concern for the pitcher itself; verify filter cartridge sourcing if purchasing replacements.

Bare metal or glass, no coating at all

More countertop filters grades

How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.