Eurotech · Office Chairs
Eurotech Maze Task Chair
No known PFAS risk, but limited transparency on fabric treatments, contact Eurotech for specifics if concerned.
The Eurotech Maze Task Chair is primarily steel/aluminum frame with fabric upholstery and foam, materials not inherently prone to PFAS. However, Eurotech provides no public disclosure about any stain-resistant or water-resistant treatments applied to the upholstery.
Shop Eurotech on Amazon →Material
Fabric upholstery, foam, steel/aluminum frame
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Category baseline
furniture is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
The full breakdown
What it's made of and why it matters
The Maze uses fabric upholstery over polyurethane foam cushioning with a steel or aluminum frame. Polyurethane foam can off-gas volatile organic compounds (VOCs) during initial use, particularly in warm or poorly ventilated spaces. The fabric treatment, whether flame-retardant, stain-resistant, or water-resistant, is not publicly specified by Eurotech and may contain chemical additives. Frame materials (steel/aluminum) are generally inert and pose minimal leaching risk under normal office conditions.
The brand's record and disclosure
Eurotech is a mid-market office furniture manufacturer with no major published safety recalls on the Maze model. The company provides minimal public disclosure on chemical composition or fabric treatments; safety data sheets are not readily available on their consumer website. No third-party certifications (GreenGuard, OEKO-TEX, etc.) are advertised for this chair. Contacting Eurotech directly is necessary to confirm whether upholstery uses brominated or chlorinated flame retardants or other restricted additives.
How it compares in its category
The Maze sits in the mainstream commercial office chair segment, sharing typical material profiles with brands like HON and Global. Higher-end manufacturers (Herman Miller, Steelcase) often publish detailed environmental and chemical data; budget alternatives rarely do. This chair's hazard profile is not significantly different from comparable mid-market task chairs, though transparency lags behind premium competitors. Without certification or public testing, it occupies a middle ground of presumed safety with unverified specifics.
If you buy it
Air out the chair in a well-ventilated space for the first 24-48 hours to minimize VOC exposure from foam off-gassing. Avoid placing it in direct sunlight for extended periods, as heat can accelerate outgassing and degrade foam durability. Vacuum fabric regularly and spot-clean with mild soap and water; harsh chemicals may degrade coatings or treatments. If fabric shows significant wear, staining, or odor persistence after 3-5 years, consider replacement, as cushion support typically declines and treatment integrity fails.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Polyurethane foam off-gassing (VOC emission)
Standard polyurethane foam in office chair cushions can release VOCs such as toluene diisocyanate (TDI) or other organics during the first weeks of use. Magnitude and duration vary by foam formulation; Eurotech does not publish foam specifications or off-gassing test results (ISO 16000 or similar).
Flame-retardant chemical additives in fabric or foam
Office furniture often uses brominated or halogenated flame retardants in upholstery or foam to meet fire codes. Eurotech's Maze material composition is not publicly disclosed; presence, type, and level of such additives are unknown without direct manufacturer contact.
Formaldehyde in fabric finishes or binders
No recall or published report of formaldehyde-treated upholstery in the Eurotech Maze. Modern fabric finishes for commercial chairs typically use low-formaldehyde or formaldehyde-free resins, but verification is not available from brand documentation.
Foam degradation and particulate release over time
Polyurethane foam in chairs degrades with age, humidity, and UV exposure, potentially releasing fine particles or degraded polymer fragments. This is a normal wear hazard, not a manufacturing defect, but relevant for long-term use in poorly maintained spaces.
Heavy metals in dyes or pigments (fabric)
No published data on dye composition for the Maze fabric. Commercial upholstery dyes are typically regulated under REACH (EU) and similar standards, but cadmium, lead, or other heavy metals in low-quality dyes remain a theoretical risk absent third-party testing.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 62% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
More office chairs grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.