Ecos · Cleaning Wipes
CloroxPro EcoClean Disinfecting Wipes 75 Wipes/ Container 3/Pack
Lower concern; disinfecting wipes typically pose minimal PFAS risk unless treated for water resistance.
CloroxPro EcoClean disinfecting wipes are cotton-like disposable wipes with no disclosed water-repellent or grease-resistant treatment. Standard disinfecting wipes do not require PFAS-based coatings.
Shop Ecos on Amazon →Material
Woven nonwoven substrate (likely polypropylene/cellulose blend)
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Category baseline
other is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
The full breakdown
What it's made of and why it matters
CloroxPro EcoClean wipes use a woven nonwoven substrate, likely a polypropylene and cellulose blend, saturated with a disinfectant solution. This material choice is inherently low-risk because nonwovens do not require toxic binders or flame retardants typical of foam or dense fabrics. The substrate will not shed microplastics into surfaces or air during normal use, and cellulose content improves compostability. The disinfectant itself (likely sodium hypochlorite or quaternary ammonium) is not absorbed through skin in cleaning contexts and evaporates quickly.
The brand's record and disclosure
ECOS is owned by SC Johnson and carries EPA Safer Choice certification for multiple product lines, signaling third-party vetting for reduced toxicity. The brand has a documented history of transparent ingredient labeling and avoidance of phthalates and nonylphenols in cleaners. However, ECOS has not publicly disclosed PFAS use or avoidance in wipe formulations, leaving water-resistance treatment status unclear. This silence is not unusual in the category but represents a minor transparency gap.
How it compares in its category
Disinfecting wipes as a category rarely contain hazardous heavy metals or volatile organic compounds at levels of concern, since the substrate is pre-saturated and sealed. CloroxPro EcoClean ranks above conventional bleach wipes (which can off-gas chlorine) and comparable to other EPA Safer Choice certified alternatives like Seventh Generation. It underperforms only if you prioritize certified compostability or want explicit PFAS-free labeling, neither of which is standard in this segment.
If you buy it
Use wipes in ventilated spaces to avoid inhaling disinfectant vapors, though risk is low during normal application. Store the sealed container away from heat and direct sunlight to prevent premature saturation loss. Replace the container when wipes dry out or saturant separates visibly. Dispose of used wipes in trash (not compost or drains), as the disinfectant residue persists on the substrate.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Volatile organic compounds (VOCs) from disinfectant saturation
Sodium hypochlorite and quaternary ammonium solutions release minor VOCs during use, but concentration and exposure time in typical cleaning tasks pose minimal inhalation risk. Ventilation during use mitigates this further.
Skin or eye irritation from disinfectant contact
Pre-saturated wipes can cause mild irritation if solution contacts mucous membranes or broken skin; this is a use-error hazard, not a formulation defect. Instructions recommend avoiding face contact.
Microplastic shedding from nonwoven substrate
Polypropylene-cellulose nonwovens are resistant to fragmentation during normal wet wiping. No recalls or studies document microplastic release from this product type during intended use.
Antimicrobial residues accumulating on surfaces
Quaternary ammonium compounds (if used) are water-soluble and do not bioaccumulate on cleaned surfaces; residual chlorine evaporates rapidly. This is not a documented concern for disinfecting wipes.
Heavy metals in substrate or ink printing
ECOS products are not known to contain lead, cadmium, or other heavy metals in coatings or dyes. The plain white nonwoven substrate requires minimal pigmentation.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
Safer alternatives in Cleaning Wipes
Seventh Generation Disinfecting Wipes
Disinfecting Wipes Seventh Generation
nonwoven fabric (polypropylene/polyester blend), quaternary ammonium disinfectant
Lower PFAS concern: Seventh Generation's transparent stance and third-party certifications support a safer choice for disinfecting wipes.
✓Verified PFAS-free by a third party
Better Life
All Purpose Wipes
nonwoven fabric blend (cellulose/polypropylene base)
Lower-concern choice; no known PFAS risk in basic all-purpose wipe formulations.
⚠Risky category by default
Ecos
EO Cleansing Hand Wipes Lavender 10 CT
nonwoven cellulose/plant-based wipe with water and plant extracts
Lower PFAS concern; routine hand wipes with no obvious treatment triggers.
⚠Risky category by default
More cleaning wipes grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.