Demon · Ski & Sports Wax
Demon Modified Hydrocarbon Wax
Hydrocarbon wax is inherently lower concern. No PFAS expected.
Demon's modified hydrocarbon wax is a hydrocarbon-based product without known PFAS chemistry. No brand claims or third-party verification available to confirm.
Shop Demon on Amazon →Material
hydrocarbon wax
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
Category baseline
other is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
The full breakdown
What it's made of and why it matters
Demon Modified Hydrocarbon Wax is a petroleum-derived paraffin or mineral wax blend, likely with additives for hardness, slip, or water resistance. Hydrocarbon waxes are chemically inert at typical use temperatures and do not off-gas volatile organic compounds (VOCs) the way synthetic polymers do. The 'modified' designation suggests inclusion of tackifiers, thickeners, or functional polymers, but without ingredient disclosure this cannot be confirmed. No inherent carcinogenic or endocrine-disrupting properties are associated with base hydrocarbon wax itself.
The brand's record and disclosure
Demon provides no public safety data sheet, ingredient transparency, or third-party certifications accessible in standard sources. The brand maintains silence on PFAS stance and does not appear to have faced recalls or documented safety controversies specific to this product line. Absence of disclosure is not uncommon in specialty wax manufacturers, but limits independent verification of additive safety. Buyers have no established record of harm or regulatory warnings to reference.
How it compares in its category
Hydrocarbon waxes are a low-hazard baseline for coatings and surface treatments compared to synthetic polymers, epoxies, or fluorinated alternatives. Demon's lack of PFAS aligns it with the safer segment of the wax market. Without knowing intended application (cosmetic, automotive, industrial), direct category comparison is limited, but modified hydrocarbon waxes are generally considered safer than flame-retardant or solvent-heavy formulations. No data suggests this brand is inferior to unlabeled competitors in the same material class.
If you buy it
Use in well-ventilated areas, though VOC emissions are not typical for hydrocarbon wax. Avoid prolonged skin contact with modified versions if additives include irritants (unknown without disclosure). Store away from heat sources and direct sunlight to prevent softening or separation of additives. For cosmetic or food-contact applications, verify Demon's compliance with relevant regulations (FDA, EU Cosmetics Regulation) before use; hydrocarbon wax suitability depends on end-use.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Additive composition (unknown)
The term 'modified' indicates additives not disclosed by Demon. Possible inclusions (tackifiers, UV absorbers, colorants) could introduce minor hazards; absence of ingredient list prevents assessment.
Skin/mucous membrane irritation
Base hydrocarbon wax is non-irritant, but modified formulations may include irritant polymers or solvents. No reported incidents for this product or brand.
VOC or solvent off-gassing
Hydrocarbon wax does not off-gas VOCs under normal conditions, unlike polyurethane or epoxy coatings. Risk is absent unless formulation includes residual solvents (not documented for Demon).
Heavy metal contamination in pigments/additives
If Demon's modified wax includes colorants or mineral additives, trace metals are theoretically possible but unconfirmed. No recalls or testing data available.
Thermal degradation at high heat
Hydrocarbon waxes soften or degrade above 150-200°C depending on grade. Use below manufacturer's stated melting point to avoid off-gassing or additive breakdown; limits not provided by Demon.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
Safer alternatives in Ski & Sports Wax
Maplus
Arctic Base Fluor Free 1 kg
ski wax base, fluorine-free formulation
Lower concern ski wax; explicit fluor-free claim aligns with stated formula.
✓Naturally PFAS-free material
Maplus
BP10 100g
Paraffin-based ski/snowboard wax
Paraffin wax unlikely to contain PFAS, but brand discloses nothing.
✓Naturally PFAS-free material
Maplus
Xcelerate Pro 2 Warm-Moly 50g
Ski/snowboard wax blend with molybdenum additive
Ski wax formulation data unavailable; typical waxes unlikely to contain PFAS.
✓Naturally PFAS-free material
More ski & sports wax grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.