Clorox Bleach Wipes · Cleaning Wipes
Clorox Bleach Disinfecting Wipes - (300) Individually Wrapped Wipes (31424)
Lower-concern for typical use, but Clorox has not publicly disclosed PFAS status for this product.
Clorox Bleach Disinfecting Wipes are primarily cellulose and polypropylene nonwovens with sodium hypochlorite disinfectant, materials not inherently linked to PFAS. However, Clorox does not publicly disclose whether the wipes contain any aqueous film-forming foam (AFFF) residues or water-resistant coatings that might introduce PFAS.
Shop Clorox Bleach Wipes on Amazon →Material
Nonwoven wipe (cellulose/polypropylene blend); active ingredient sodium hypochlorite
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Category baseline
other is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
The full breakdown
What it's made of and why it matters
These wipes are a nonwoven blend of cellulose and polypropylene saturated with sodium hypochlorite (bleach) solution. The substrate itself is inert once dried; the hazard profile is dominated by the active bleach ingredient, not the carrier material. The individually wrapped format minimizes volatile loss and degradation during storage, which maintains disinfectant efficacy and reduces user exposure to degradation byproducts.
The brand's record and disclosure
Clorox is a major EPA-registered disinfectant manufacturer with long product history and compliance with consumer product labeling standards. The company has not publicly disclosed PFAS content for this specific product line, despite growing industry pressure on fluorochemical use in water-resistant wipe formulations. No major recalls or safety violations specific to this product are on public record. Standard bleach safety warnings (skin/eye irritation, respiratory caution) are labeled appropriately.
How it compares in its category
Sodium hypochlorite wipes are among the most straightforward disinfectant products in terms of chemical hazard profile: the active ingredient is not absorbed through skin in typical use, and the wipe substrate poses no known leaching or off-gassing risk. Compared to quaternary ammonium (quat) wipes or phenolic disinfectants, bleach wipes have simpler, shorter ingredient lists and lower systemic toxicity risk. The main differentiation is bleach's corrosivity to certain surfaces and pungent odor.
If you buy it
Use in well-ventilated areas and never mix with other cleaners (especially ammonia-based products, which release toxic chloramine gas). Wear gloves to prevent skin irritation from sodium hypochlorite; wash hands after use. Do not use on aluminum, stainless steel, or copper in high-frequency applications, as bleach can cause etching or corrosion over time. Store in a cool, dry place away from direct sunlight to prevent solution degradation; individual wrapping helps extend shelf life.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Skin and eye irritation from sodium hypochlorite
Sodium hypochlorite (0.5-8% in typical disinfectant wipes) is a known skin and mucous membrane irritant. Direct contact or splash injury is the primary concern; incidental skin exposure during normal use is low-risk if hands are washed afterward.
Respiratory irritation from bleach vapor
Chlorine gas can be released from sodium hypochlorite, especially in warm or poorly ventilated spaces. This is a labeling-recognized hazard; typical consumer use involves brief exposure with low concentrations in ambient air unless the product is misused in enclosed spaces.
Chemical incompatibility hazards
Mixing with ammonia or acid-based cleaners produces toxic chloramine or chlorine gas. This is a use-error hazard, not a material defect, but the risk is significant enough to warrant prominent labeling and consumer awareness.
Surface corrosion from hypochlorite exposure
Prolonged or repeated contact with certain metals (aluminum, copper, some stainless steel finishes) can cause etching, discoloration, or material degradation. This is not a direct health hazard but indicates chemical reactivity; not relevant to the user unless they have specific surface sensitivity.
Microplastic or fiber shedding from nonwoven substrate
Nonwoven cellulose-polypropylene blends are not known to shed microplastics during typical wiping use. The wipes are designed to disintegrate or be discarded after single use, minimizing environmental persistence; no published data suggests inhalation or ingestion risk from normal use.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 55% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
Safer alternatives in Cleaning Wipes
Seventh Generation Disinfecting Wipes
Disinfecting Wipes Seventh Generation
nonwoven fabric (polypropylene/polyester blend), quaternary ammonium disinfectant
Lower PFAS concern: Seventh Generation's transparent stance and third-party certifications support a safer choice for disinfecting wipes.
✓Verified PFAS-free by a third party
Better Life
All Purpose Wipes
nonwoven fabric blend (cellulose/polypropylene base)
Lower-concern choice; no known PFAS risk in basic all-purpose wipe formulations.
⚠Risky category by default
Ecos
EO Cleansing Hand Wipes Lavender 10 CT
nonwoven cellulose/plant-based wipe with water and plant extracts
Lower PFAS concern; routine hand wipes with no obvious treatment triggers.
⚠Risky category by default
More cleaning wipes grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.