Chlorox Plus+ Bleach Wipes · Cleaning Wipes
Clorox Dispatch Wipes Disinfectant 9 x 10, w/ Bleach, Soft Pack, 60/pk
Lower PFAS concern; disinfectant wipes have no known functional need for PFAS, but Clorox provides no public disclosure.
Clorox Dispatch wipes are bleach-soaked nonwoven fabric without obvious water-repellent or grease-resistant coatings that would typically trigger PFAS use. The brand makes no PFAS claims or disclosures.
Shop Chlorox Plus+ Bleach Wipes on Amazon →Material
nonwoven fabric wipe (cellulose/polyester blend) with bleach solution
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Category baseline
other is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
The full breakdown
What it's made of and why it matters
These wipes are a nonwoven fabric substrate (cellulose and polyester blend) saturated with sodium hypochlorite (household bleach) solution at approximately 3-8% concentration. The fabric carrier is designed to be disposable and breakdown-resistant enough to stay intact during use but not so durable that it persists in the environment. The bleach itself is a well-established disinfectant that works through oxidation of microbial cell membranes; it does not require PFAS to function as a wipe formulation.
The brand's record and disclosure
Clorox is a major manufacturer with established product safety documentation and readily available safety data sheets for its disinfectant products. The company has faced no notable recalls or safety controversies specific to bleach wipes related to non-PFAS chemical hazards in recent years. However, Clorox does not publicly disclose whether PFAS are present in the wipe formulation or fabric treatment, which limits transparency despite lower functional risk in this product type.
How it compares in its category
Bleach wipes occupy a middle ground in disinfectant effectiveness and hazard profile. They are more potent than alcohol or quaternary ammonium wipes but carry greater irritation risk and require more careful handling. Most major brands in this category (Lysol, Clorox, store brands) use similar sodium hypochlorite formulations with comparable safety profiles; differentiation is mainly in fabric softness and fragrance additives rather than core chemistry.
If you buy it
Wear gloves or wash hands immediately after use to avoid skin irritation from bleach residue. Keep the pack sealed between uses to prevent the saturated fabric from drying out and to minimize inhalation of bleach vapors in enclosed spaces. Do not use on surfaces that will contact food directly without rinsing, and avoid mixing with other cleaners (especially ammonia-based products), which can produce toxic chlorine gas. Replace the pack if wipes dry out or lose saturation, as dried bleach is less effective and may become brittle.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Sodium hypochlorite (bleach) irritation and corrosion
Direct skin or eye contact with bleach-saturated wipes can cause irritation, chemical burns, or temporary discomfort. This is an intended property of the product and is manageable with glove use and hand washing, but represents the primary acute hazard.
Inhalation of chlorine vapors
Use of these wipes in poorly ventilated spaces may release low levels of chlorine gas, particularly if the pack is left open or used repeatedly in a small area. Risk is low with normal household use but increases with prolonged exposure in enclosed bathrooms or small rooms.
Fragrance and fragrance allergens
Clorox bleach wipes typically contain added fragrances to mask bleach odor. Some individuals may experience allergic contact dermatitis or respiratory sensitivity to fragrance compounds, though the incidence is low in the general population.
Nonwoven fabric microfibers and shedding
The cellulose-polyester blend may shed small fibers during use, but no specific recall or health hazard related to microfiber shedding from these wipes has been documented. Fibers are typically discarded with the wipe.
Heavy metals in pigments or dyes
No public reports or safety warnings indicate heavy metal contamination in Clorox bleach wipes. Bleach-based disinfectants do not typically require problematic pigments or dyes in their formulation.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
Safer alternatives in Cleaning Wipes
Seventh Generation Disinfecting Wipes
Disinfecting Wipes Seventh Generation
nonwoven fabric (polypropylene/polyester blend), quaternary ammonium disinfectant
Lower PFAS concern: Seventh Generation's transparent stance and third-party certifications support a safer choice for disinfecting wipes.
✓Verified PFAS-free by a third party
Better Life
All Purpose Wipes
nonwoven fabric blend (cellulose/polypropylene base)
Lower-concern choice; no known PFAS risk in basic all-purpose wipe formulations.
⚠Risky category by default
Ecos
EO Cleansing Hand Wipes Lavender 10 CT
nonwoven cellulose/plant-based wipe with water and plant extracts
Lower PFAS concern; routine hand wipes with no obvious treatment triggers.
⚠Risky category by default
More cleaning wipes grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.