Aussie · Hair Spray
Aussie Instant Freeze Non- Aero Hair Spray
Lower concern. Typical aerosol hair spray formulation.
Hair sprays generally use water-based resins and solvents with minimal PFAS risk. No public evidence of Teflon-family coating coatings in Aussie's non-aerosol formulation; brand makes no PFAS claims.
Shop Aussie on Amazon →Material
water-based polymers, propellant, alcohol solvents
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
Why this grade
Safe base material
Made from a material with no inherent PFAS use (ceramic, mineral, or natural fiber).
Category baseline
cosmetics is a category where PFAS exposure is more common.
No PFAS disclosure
No public statement about PFAS in this product.
The full breakdown
What it's made of and why it matters
Aussie Instant Freeze is a water-based aerosol hair spray, meaning it uses water and alcohol solvents rather than oil-based carriers, which reduces volatility and skin irritation risk compared to older formulations. The holding agent is a synthetic polymer resin (likely acrylates or similar film-formers) that dries on hair to create hold without permanent bonding. Non-aero packaging eliminates pressurized propellant concerns, relying instead on pump or spray mechanism, which reduces inhalation exposure to propellants during application.
The brand's record and disclosure
Aussie is owned by Procter & Gamble and follows standard cosmetic ingredient disclosure on product labels and safety data sheets. The brand has not published independent certifications (organic, cruelty-free, PFAS-tested) that would differentiate it on safety transparency. No significant recalls or regulatory actions specific to this product line are on public record. The brand's stance on PFAS is not publicly declared, which is typical for mass-market hair care and does not indicate a safety failure.
How it compares in its category
Water-based, non-aerosol hair sprays occupy the middle ground in the market: safer than older solvent-heavy formulas, but less transparent than indie brands that publish third-party testing results. Aussie's price point and wide retail availability make it a practical choice for routine use; premium or natural brands may offer lower solvent content or plant-based polymers, but cost more. The non-aero format is genuinely lower-risk for inhalation compared to pressure-can alternatives, matching safety trends in the category.
If you buy it
Use in a well-ventilated area to minimize inhalation of alcohol solvents and aerosolized polymer particles during spraying. Apply to dry hair, not wet skin or near eyes, to avoid irritation. The product does not require special storage beyond room temperature out of direct sunlight; shelf life is typically 2-3 years unopened. Discontinue use if irritation or allergic reaction occurs; if used daily, monitor scalp health, as buildup of polymer resins can occur and may require clarifying shampoo use every 1-2 weeks.
Beyond PFAS: other things we checked
Established hazard classes for this product type, assessed from public information. These never change the PFAS grade; a Likely flag caps the Verdict at “Buy with care.”
Alcohol solvent inhalation
Water-based hair sprays contain ethanol or isopropanol as carriers. Spraying releases small amounts into air; chronic or heavy daily use in poor ventilation may cause headaches or dizziness, but exposure levels in typical home use are low and below occupational limits.
Synthetic polymer buildup on scalp and hair
Acrylate and similar film-forming polymers in spray formulas can accumulate with daily use, potentially trapping moisture and causing dryness, flaking, or irritation in sensitive individuals. This is a cosmetic rather than systemic hazard, managed by periodic clarifying treatments.
Eye and mucous membrane irritation
Polymer resins and alcohol solvents can irritate eyes, throat, and nasal passages if sprayed directly onto face or inhaled in large doses. Typical use (spraying hair only) carries minimal risk; accidental exposure requires rinsing with water.
Formaldehyde releasers or preservatives
No public record of formaldehyde-releasing preservatives in Aussie Instant Freeze. Water-based aerosols typically use methylisothiazolinone or similar non-formaldehyde systems, though the full preservative system is not disclosed on the label.
Heavy metals in dyes or pigments
Hair sprays are colorless or lightly tinted; pigment content is minimal or absent. No public reports of heavy metal contamination in Aussie products. Standard cosmetic regulations in the US and EU limit lead, cadmium, and arsenic in color additives.
What we don’t know
This grade is a model-based estimate from public materials, coatings, and brand disclosure at 72% confidence. It is not a lab result.
No independent PFAS lab test is on record for this exact product. A lab test could move the score in either direction.
The brand has not made a specific, verifiable PFAS-free statement, so part of this score reflects that missing disclosure rather than a confirmed material.
Formulations and coatings change between production runs. Always check the current label before buying.
More hair spray grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.